How to Replace Rear Brakes 2004-08 Ford F150

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS02139

Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality rear TRQ brake pads and rotors on your 2004-2008 Ford F150.

• Check here for more videos on the 2004-08 Ford F-150:    • Ford F-150 2004-08 11th Generation  

This process should be similar on the following vehicles:
2004 Ford F150 Truck
2005 Ford F150 Truck
2006 Ford F150 Truck
2007 Ford F150 Truck
2008 Ford F150 Truck

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Pry Bar http://1aau.to/oa/1AXAA00020
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 21mm Socket http://1aau.to/oa/1AXAA00043
• Hose Pinch-Off Pliers
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels http://1aau.to/oa/1AXSS00035
• Rust Penetrant
• Chisel http://1aau.to/oa/1AXAA00055
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Wheel Chocks
• Wire Brush http://1aau.to/oa/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Ford F-150 2004-08 11th Generation:    • Ford F-150 2004-08 11th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.