Projection of Solids (Tamil) | Part 2 - Problem | Lecture 10.2 | Engineering Graphics

A solid is a three-dimensional object, i.e. it should have three dimensions such as length, breadth, thickness etc. Various shapes of solids are considered such as prisms, pyramids, cylinder, cone etc. The topic "Projection of Solids" in Engineering Graphics describes how different 2D views of a solid has been drawn in a drawing sheet. The solid is usually located in the first quadrant formed by the principal planes and followed the first angle projection.
There are four different positions of a solid as follows,
1. Axis is parallel to both the planes
2. Axis is perpendicular to one plane and parallel to the other
3. Axis is inclined to one plane and parallel to the other
4. Axis is inclined to both the planes

Watch this part-2 Tamil video (Lecture 10.2) that explains the third position of a solid and a problem that involves a pentagonal prism.
English version:
   • Projection of Solids (English) | Part...  

For more videos about Engineering Graphics in both Tamil & English,
Click the following link to enter into the Channel Page :
https://cutt.ly/smedutalk

Projection of Solids (Tamil)| Part 1-Intro & Drawing procedure | Lecture 10.1 | Engineering Graphics
   • Projection of Solids (Tamil)| Part 1-...  

Projection of Planes (Tamil) | Part 4 - Problem | Lecture 9.4 | Engineering Graphics
   • Projection of Planes (Tamil)| Part 4 ...  

Projection of Planes (Tamil) | Part 3 - Problem | Lecture 9.3 | Engineering Graphics
   • Projection of Planes (Tamil) | Part 3...  

Projection of Planes (Tamil) | Part 2 - Problems | Lecture 9.2 | Engineering Graphics
   • Projection of Planes (Tamil) | Part 2...  

Projection of Planes (Tamil) | Part 1-Intro & Drawing procedure | Lecture 9.1 | Engineering Graphics
   • Projection of Planes (Tamil) | Part 1...  

Projection of Lines (Tamil) | Part 5 - Problems | Lecture 8.5 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 5 ...  

Projection of Lines (Tamil) | Part 4 - Problems | Lecture 8.4 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 4 ...  

Projection of Lines (Tamil) | Part 3 - Problems | Lecture 8.3 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 3 ...  

Projection of Lines (Tamil) | Part 2 - Problems | Lecture 8.2 | Engineering Graphics
   • Projection of Lines (Tamil) | Part 2 ...  

Projection of Lines(Tamil) | Part 1-Introduction & Drawing procedure | Lecture 8.1| Engineering Graphics
   • Projection of Lines (Tamil) | Part 1-...  

Projection of Points (Tamil)| Part 2-Problems | Lecture 7 | Engineering Graphics |Dr.S.Malligarjunan
   • Projection of Points (Tamil)| Part 2-...  

Projection of Points(Tamil)|Part 1-Introduction & Drawing procedure| Lecture 6 |Engineering Graphics
   • Projection of Points(Tamil)|Part 1-In...  

Theory of Projection Part 1-Introduction(Tamil)| Lecture 4 |Engineering Graphics |Dr.S.Malligarjunan
   • Theory of Projection Part 1-Introduct...  

Orthographic Projection (Tamil) | Theory of Projection Part 2 | Lecture 5 | Engineering Graphics
   • Orthographic Projection (Tamil) | The...  

Dimensioning (Tamil) | Lecture 3 | Engineering Graphics | Principles | Methods | Dr.S.Malligarjunan
   • Dimensioning (Tamil) | Lecture 3 | En...  

Line Types & Suitable Pencils (Tamil) | Lecture 2 | Engineering Graphics | Dr.S.Malligarjunan
   • Line Types & Suitable Pencils (Tamil)...  

Frequently used terms | Engg. Graphics | Must watch video| Tamil medium students| Dr.S.Malligarjunan
   • Frequently used terms | Engg. Graphic...