AUTOMATED Primer Pocket Reamer & Swage for the Lee App - Automatic Processing Press.

➡ SPECIAL THANKS TO MR. GJ FOR MAKING THIS PROJECT POSSIBLE.
Automated Reamer & Swage for primer pockets:
Using the Lee Precision Automatic Processing Press ( Lee App 90933), Lee APP Primer Pocket Swage kit (90237), Dillon case feeder and reamers from Lyman, Hornady & Burstfire.

----------------------------------------------------------------------------------------------------------------------------------------------
Disclaimer:
All information in this video is merely for informational purposes. The same is not intended as a substitute for professional advice. Should you decide to act upon any information on this video or channel, you do so at your own risk.

Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any of our videos. By viewing or flagging this video you are acknowledging the above.
----------------------------------------------------------------------------------------------------------------------------------------------
MATERIAL LIST:
V1, V2, V3: DRIVE SHAFT: _ M12 EN24 Type Shaft.
V1, V2, V3: PILLOW BLOCK BEARING: _ UCP210 _ FSB M12 Bearing block.
V1, V2, V3: PRESS: _ 90933 _ Lee Precision Automatic Processing Press ( Lee App).
V1, V2, V3: PRESS ATTACHMENT: _ 90237 _ Lee APP Primer Pocket Swage kit.
V1, V2, V3: NEW SPRING: _ 5061032 _ WÜRTH Compression Spring 1.0 x 32 x 10 mm .
V1, V2, V3: REAMER BIT: _ CPT-Reamer Set _ Burstfire LP Reamer.
V1, V2, V3: REAMER BIT: _ 7990365 _ Lyman LP Reamer.
V1, V2, V3: REAMER BIT: _ 390751 _ Hornady LP Reamer.
V1, V2, V3: MAIN STEEL FRAME: _ 5/16 plate, 15″ x 9″ x 4.5″ / 8 mm plate, 381 x 228 x 115 mm.
V1, V2, V3: PRESS SUPPORT PLATE: _ 3/8 plate, 4″ x 3.15″ / 10 mm plate, 80 x 100 mm.
V1, V2, V3: MOTOR SUPPORT PLATE: _ 1/8 plate, 8.26″ x 5.51″ / 3 mm plate, 210 x 140 mm.
__, V2, V3: DRIVE MOTOR: _ 6M71B4 _ Elvem 1 phase motor, 230VAC, 1325rpm, 0.37kW.
__, V2, V3: MOTOR STARTER: _ NS2-25-4 _ Chint Manual motor Starter, 2.5A to 4.0A, AC.
__, V2, V3: DRIVE BELT: _ 13A700MC _ Good Year, V Type 1/2 inch belt, 700mm.
__, V2, __ : PULLEY: _ SPA V-Pulleys, 1/2, (SPA 100x1 & SPA 63x1).
__, __, V3: PULLEY: _ SPA V-Pulleys, 1/2, (SPA 100x1 & SPA 43x1).
V1, V2, V3: MAIN BOLTS USED: _ (4pc_M10x30), (4pc_M6x18), (3pc_M6x25), (8pc_M5x12).
V1, V2, V3: OTHER ITEMS: _ Bolts, nuts, washers, spring washers, wire, cable ties.
V1, V2, V3: OTHER ITEMS: _ sliders, hinges, paint, wall plug, enclosure box, Perspex.
V1, __, __ : MOTOR SUPPORT PLATE: _ 1/8 plate, 4.73″ x 5.32″ / 3 mm plate, 120 x 135 mm.
V1, __, __ : DRIVE MOTOR: _ XD-42GA775 Xin Da motor company _ 12VDC, 600rpm, 42W.
V1, __, __ : POWER SUPPLY: _ MKC-12V5A _ Melehioni Ready co. ltd, 12VDC, 5000mA.
V1, __, __ : DC CONTROLLER: _ X00166MV8J _ Kyrio DC motor Controller, 12VDC, MHHQRC.
V1, __, __ : DRIVE BELT: _ 6204MC Gates _ V Type 3/8 inch belt, 620mm.
V1, __, __ : PULLEY: _ SPA V-Pulleys, 1/2, (SPA 63x1 & SPA 50x1).
----------------------------------------------------------------------------------------------------------------------------------------------
Version 3 costings as follows:
€18.00c 1 x DRIVE SHAFT (Material only x 1.5 meters).
€24.00c 2 x PILLOW BLOCK BEARING.
€145.00c 1 x LEE APP PRESS.
€55.00c 1 x LEE PRESS ATTACHMENT.
€1.00c 1 x NEW SPRING
€8.00c Estimated price for 1 reamer bit, depending make and dimension.
€40.00c 1 x MAIN STEEL FRAME, including bending at workshop.
€10.00c 2 x PRESS SUPPORT PLATE 3/8 & 1/8 plates.
€160.00c 1 x DRIVE MOTOR.
€45.00c 1 x MOTOR STARTER.
€9.00c 1 x DRIVE BELT
€30.00c 2 x PULLEYS: 100x1 & 43x1
€15.00c 1 x LOT of Bolts, nuts, washers, spring washers, wire, cable ties.
€45.00c 1 x LOT of sliders, hinges, paint, wall plug, enclosure box, Perspex.
€605.00c ➡ SUBTOTAL

€30.00c Engineering work for 1 main drive shaft and 1 small drive shafts.
€120.00c Engineering work for 1 main drive shaft and 6 small drive shafts. (Spare)
€150.00c ➡ SUBTOTAL

€755.00c ➡ GRAND TOTAL.
----------------------------------------------------------------------------------------------------------------------------------------------
#reloadingandmore,
#reloadingandmore1966,
#LeeApp,
#reloading,
#45acp