How to Determine the Correct Clock Motor Shaft

The Correct Clock Motor Shaft is a Measurement that will determine the success of Your Clock Project
For More Clock Training Videos GO TO: https://www.clockparts.com

We look forward to YOUR Call: 888-827-2387

On a quartz movement there are three sections of the hand shaft. The first and lowest is that threaded section. That's where an hex nut goes on to hold the movement in place.

The next section is going to be the hour hand shaft and that's where the hour hand presses on and the next is the minute hand shaft.

If you look real closely you'll see that the minute hand shaft actually has two little flat sides on it. And that's so you can align the hand properly and then one of these little nuts goes on the top to hold it in place.

For the second hand shaft you have to look very very closely it's right
inside the minute hand shaft. So we really have four concentric shafts on a clock movement.

The threaded shaft, the hour hand shaft, minute hand shaft and the second hand shaft. Actually there's only two measurements that are important.

The threaded shaft length is very important because that's what defines how thick of material you can go through and that's why we have six different shaft lengths. Each one about it an 1/8 of an inch larger than the other.

Please Go to Our Movement Selection Page for More Information:
https://www.clockparts.com/clock-move...

So that regardless of what material you're going through there is gonna be a shaft available for it. The other important measure is the entire length of the shaft called the overall length where you measure
from the top of the shaft all the way to the bottom of the threading.

The overall shaft length is important because if you have any type of glass lens cover lens on your clock you want to make sure that
you're not putting a shaft in that's so long that it's going to actually hit the top of the lens in some way or have a minute or second hand hit and rub.

If there's any confusion we can be reached at: 888-827-2387

View More ClockParts Videos:
   • Quiet Clock Motor - Best Silent Clock...  
   • How to Mount the Movement for Large W...  
   • How to Make Clock Hands Fit any Dial ...  
   • How to Build a Large Photo Wall Clock...  

Visit our Google + Page:
https://plus.google.com/1107267163363...

Pin Us on Pinterest:
  / clockparts  

Learn More on our Blog
https://www.clockparts.com/blog/

Visit our Facebook Page:
  / 233578686797853  

Check Out Our Tweets:
  / clockpartscom