Fix your EZGO... drive clutch sticking?

Fix your EZGO... drive clutch sticking?
After finishing the rebuild we were having a little trouble with getting it going. On downhill or without anyone sitting in the driver seat or with it jacked up off the ground you could press the gas and go like nothing was wrong. We did some investigating and finally narrowed it down to the clutch was not disengaging all the way and was causing enough resistance on the starter that it would not turn over the motor. After some a few hiccups, I finally got the old clutch off and installed a new one now we just hop in and go!

My gear:
I use the Audio Technica AT2020 XLR because I wanted to be able to record music occasionally. If you do not need that then you could just go straight for the USB version and wouldn’t need the phantom power or extra cables. The external recorder is a must when using a cell phone and will help with audio sync when editing.

Zoom H1: http://amzn.to/29K9pJR
Audio-Technica AT2020: http://amzn.to/29TnIdv
Phantom power: http://amzn.to/29LF3CV
XLR to USB cable: http://amzn.to/29YBoUW
XLR Microphone cable: http://amzn.to/29YCe4g


Don’t forget to subscribe, like, leave lots of feedback, advice, suggestions, etc. but most importantly get inspired to get out of your routine! Stop tapping the screen on your phone all day and get out there and learn something new by doing!


Website: http://iambigredfishdad.com

FOLLOW ME on Instagram:   / bigredfishdad  
FOLLOW ME on Google+: https://plus.google.com/b/11319915353...
FOLLOW ME on Facebook:   / bigredfishdad-1062321890486251  
FOLLOW ME on Twitter:   / bigredfishdad  
FOLLOW ME on Pinterest:   / boards