Скачать или смотреть KTM 950 Adventure LC8 Valve Adjustment (Step-by-Step: Cam Timing & Shim Swap)

A complete, step-by-step KTM 950 Adventure (LC8) valve adjustment. I cover cam alignment, locking the engine with basic shop tools, measuring valve clearances, doing the shim math, and reassembling correctly—so you can finish this complex job with confidence.

Applies to: KTM 950 Adventure / 950 SM / 950 Super Enduro R (carb’d LC8 engines). Procedures are similar across years—confirm specs & torque values in your service manual for your exact model/year.

⚠️ Safety: Work on a cold engine. Use a torque wrench. Follow factory specs for cam cap/bridge, cover, and sprocket bolts. Rotate by hand after reassembly and verify timing marks before starting.

What you’ll learn

How to find TDC for each cylinder and align cam timing marks

Locking the crank with basic tools (per manual)

Reading clearances with feeler gauges + shim-under-bucket swap

Shim math (measure, calculate, recheck) so you only open it once

Reassembly tips: chain tension, cam bridge sequencing, gasket care

Tools & parts

Angled feeler gauges, micrometer/calipers

Shim kit for LC8 (or order singles after measuring)

Torque wrench, sockets, hex/T-handle set

Magnet pick-up, paint pen, zip ties (for chain/sprocket handling)

Gasket/sealant as required by your manual