Скачать или смотреть BT136 Soft Starter | मोटर का झटका बंद! Shakti Tech Shakti

"Soft Starter Circuit | BT136 Based Simple Motor Starter | Easy DIY Electronics Project"

Your Queries 👇

1. "How to Make Soft Starter Circuit using BT136 | Full Tutorial"


2. "BT136 Soft Starter for Motor | Smooth Power Start Circuit"


3. "Soft Start Circuit DIY | Simple Project with BT136 and Capacitors"

Learn how to make a Soft Starter Circuit using BT136 TRIAC, resistors (22k, 1.5k), capacitors (100uF, 47uF), and 1N4148 diodes.
This circuit helps to reduce sudden current surge when powering up motors, bulbs, or transformers — giving them a smooth soft start and extending their life.

📘 Circuit Components Used:

BT136 TRIAC

22kΩ × 2 Resistors

1.5kΩ × 1 Resistor

100µF 50V Capacitor

47µF 50V Capacitor

1N4148 Diode × 2


⚡ Working:
When power is applied, the capacitors charge slowly which gradually triggers the TRIAC, allowing the voltage to rise smoothly — avoiding sudden current spikes.


🎯 Watch till the end

WARNING
some ideas, And Experiment
can be dangerous.

And forethat you don't risk and damage your self, and the environment, I am a proffessional in my business with a lot of experience!

every video, even that
completed with compliance
With the all safety measures.

Enjoy the video.
this video is for demonstration and education purpose only

each demonstration presents risk and hazard.

that must be fully understood before attempting and should be perform
1. काम AC mains (220–240 VAC) पर कर रहे हैं — हमेशा पावर बंद रखें।


2. फ्यूज़ (Fuse): बोर्ड में पहले ही एक फ्यूज़ लगाएँ — 1A–2A, 250VAC (रुके हुए शॉर्ट के लिए)।


3. स्विच और सॉकेट: एक मजबूत mains switch और insulated plug/board use करें।


4. अर्थिंग (Earthing): मेन बॉडी/chassis में proper earth connection ज़रूरी है।


5. इन्सुलेशन: exposed तार/जॉइंट्स को heat-shrink / insulating tape से ढकें।


6. कम्पोनेंट रेटिंग: मेनस के पास इस्तेमाल होने वाली चीज़ें mains-rated होनी चाहिए (नीचे सूची देखें)।


7. वर्कस्पेस: सूखी, flat, non-conductive surface; पास में कोई पानी न हो।


8. PPE: safety gloves (insulating), safety goggles पहनें।


9. टेस्टिंग: पावर ऑन करने से पहले multimeter से continuity और earth-connection जाँचें।


10. बचपन से दूर रखें: बच्चों/अनुभवी न होने पर किसी experienced व्यक्ति के साथ काम करें।

Disclaimer
Video is for education use only Copyright Disclaimer under 107
of the Copyright Act 1976, allowance is made for fair use for purpose such as criticim, comment, news reposting, teaching, scholarship and research.

fair use is a use permitted by copyright status that might otherwise be in fringing. non-profit, educational or personal use tips be balance in favour of fair use
@Shaktitechshakti

#SoftStarterCircuit #BT136 #ElectronicsProject #DIYCircuit #TriacCircuit #MotorStarter #PowerControl #ElectronicsTutorial #CircuitDIY #SoftStart