OnePlus 5 Display Assembly Repair Guide - Fixez.com

OnePlus 5 Screen Replacements and Repair Parts: http://bit.ly/2t8Ggh2

Watch the Official OnePlus 5 Display Assembly Repair Guide. Following the step-by-step OnePlus 5 screen replacement instructions we have provided will help you safely fix a cracked or damaged 5.5" AMOLED display. Visit Fixez.com for all of the DIY OnePlus 5 replacement screens, parts and tools you need to fix your phone quickly, and affordably.

If you need your OnePlus smartphone repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or [email protected] and they will fix your device for you. They are available Monday - Friday, 9am to 5pm PST.

Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos!    / @fixez  
Like us on Facebook:   / fixez.com  
Follow us on Twitter:   / fixezdotcom  

OnePlus 5 Display Assembly Repair Video Steps:

Step 1

• Power down your OnePlus 5 phone.

Step 2 (OnePlus 5 Dual Nano-SIM Card Tray)

• Eject the dual Nano SIM card tray.

Step 3 (OnePlus 5 Rear Case)

• Remove the following 2 T2 Torx screws from the bottom of the OnePlus 5.

• Use the plastic triangle opening tool to release the clips and then pop the OnePlus 5 out of its space-grade aluminum rear enclosure. There is no pesky adhesive, making this procedure a snap.

• Before you can separate the rear case, you will need to disconnect the USB-C port and headphone jack cable to free it from the phone.

Step 4 (OnePlus 5 Motherboard)

• Detach the battery connector.

• Remove the following 7 Phillips screws.

• Disconnect the bevy of cables, including the one on the other side of the motherboard.

• With the cables and screws out of the way, free the OnePlus 5 motherboard from the phone.

Step 5 (OnePlus 5 Dual Rear-Facing Cameras, Earpiece Speaker, and Vibrator)

• Easily remove the 16-megapixel dual OnePlus 5 rear-facing cameras.

• Pluck out the spring-contact-connected OnePlus 5 earpiece speaker.

• Pry the vibrator up from the chassis.

Step 6 (OnePlus 5 Loudspeaker)

• Remove the following 6 Phillips screws.

• Extract the OnePlus 5 bottom loudspeaker assembly.

Step 7 (OnePlus 5 Battery)

• Remove the interconnect cable.

• Use the exposed clear plastic pull tab to peel the 3300 milliampere-hour (mAh) battery off the adhesive securing it to the OnePlus 5.

Step 8 (OnePlus 5 Earpiece Speaker, Power and Volume Buttons Cable, and Signal Cable)

• Use the spudger to pry up the small daughterboard.

• Disconnect the display cable.

• Remove the clear tape and then peel the interconnect cable off the adhesive securing to the phone.

• Remove the signal cable from the side of the midframe.

• With the tweezers in hand, carefully extricate the OnePlus 5 power button cable, volume buttons cable and NFC Antenna.

Step 9 (OnePlus 5 Display Assembly)

• Use the heat gun to warm up the adhesive securing the 5.5” OnePlus 5 display assembly to the frame.

• Use a triangle opening tool to start slicing through the adhesive.

• Take your time and apply additional heat as needed. Patiently work around the OnePlus 5 AMOLED display with triangle opening tools.

• Once you have sliced through the adhesive, be mindful of the display’s cable and the cables for the bottom buttons when decoupling the screen assembly from the frame.


* To reassemble your device, follow the steps in reverse order.