Simple Silicone Rubber Molds (no parting line) - Original Version

This video has been updated and is available here:
   • Simple Silicone Rubber Molds (Without...  

We leave this earlier version on YouTube so we don’t lose our overall views/likes (all hail the almighty algorithm), but we encourage you to check out the latest version, which has been updated with additional content, better on-screen graphics, and more.

This is part of our instructional video series for those making Parts, Patterns, Tools, & Molds. Originally available on DVD (remember those?), all of the updated videos are now available on http:// FreemanVideos.com and on this YouTube Channel.

Finally, Freeman Mfg & Supply is a material supplier. Therefore, the thousands of hours dedicated to producing this series was done in service to our industry. If you are looking for any of the materials shown, please visit us at http://freemansupply.com (our primary website for professionals) or http://miapoxy.com (for the DIY market).

Our video library now includes:

Moldmaking & Casting Videos:

1 - Using Rigid Fast-Cast Urethanes for Casting Both Molds & Parts
   • Using Rigid Fast-Cast Urethanes for C...  
2 - Making Flexible Molds with Urethane Rubber
   • Making Flexible Molds with Urethane R...  
3 - Simple Silicone Rubber Molds (Without a Parting Line)
   • Simple Silicone Rubber Molds (Without...  
4 - Two-Part Silicone Rubber Molds (Forming a Straight Parting Line)
   • Two-Part Silicone Rubber Molds (Formi...  
5 - Moldmaking With Clear Silicone Rubber
   • Moldmaking With Clear Silicone Rubber  
6 - Making Molds & Casting Thin Walled Parts (& Using Color Tints)
   • Making Molds & Casting Thin Walled Pa...  
7 - Making Two-Part Silicone Rubber Molds with Complex Parting Lines
https://tinyurl.com/spf9z8hs
8 - Tips & Tricks for Moldmaking & Casting Parts with Intricate Detail
   • Tips & Tricks for Moldmaking & Castin...  
9 - Making Simple Multi-Cavity Molds
   • Making Simple Multi-Cavity Molds  
10 - Surface Casting Method #1 (featuring Gap Wax)
   • Surface Casting Method #1 (featuring ...  
11 - Surface Casting Method #2 (With Brushable Urethane Casting Resin)
   • Surface Casting Method #2 (With Brush...  
12 - Using Fillers & Pourable Foam to Lighten a Casting (& More)
https://tinyurl.com/2cav5em5


Laminate Toolmaking & Composite Parts Videos:

1 - Laminating with Fiberglass & Epoxy - The Basics
   • Laminating with Fiberglass & Epoxy - ...  
2 - Building a Fiberglass & Epoxy Laminate Mold
   • Building a Fiberglass & Epoxy Laminat...  
3 - Vacuum Bagging a Carbon Fiber/Composite Part
https://tinyurl.com/auf6d2d8
4 - Building a Laminate Tool with Epoxy Paste
   • Building a Laminate Tool with Epoxy P...  
5 - Rapid Tool Making with the Repro Laminating System
   • Rapid Tool Making with the Repro Lami...  
6 - Making a Simple Glove Mold
   • Making a Simple Glove Mold  

Preparing Models, Molds, & Materials Videos:

1 - Prevent Your Castings & Models From Sticking to Your Molds
   • Prevent Your Castings & Models From S...  
2 - Weighing & Mixing Resins & Silicone Rubber The Right Way
   • Weighing & Mixing Resins & Silicone R...  
3 - Eliminate Entrapped Air in Molds & Castings
   • Eliminate Entrapped Air in Molds & Ca...  
4 - How NOT to Ruin Silicone Rubber When Making Molds
https://tinyurl.com/32uwjv3z