Key Battery Mitsubishi HOW TO change

This video will help you to change the key battery in you Mitsubishi L200 car key.

You can buy a high quality battery easily by clicking the Amazon link below

https://amzn.to/2WUyciz

The important thing here is the transponder chip. Unlike other car keys, it is glued to the key cover which is a really bad idea. Once these get a bit old and worn out, often the screw hole breaks and the cover comes loose. Once that happens the chip glue gives up and the chip falls out and get lost. So make sure you keep an eye on the chip!

Okay, today we're looking at a Mitsubishi key. It's a two button key, lock and unlock, and these are found on lots of the modern vehicles. To change the battery, there's a screw here, undo that screw and then just pull the back off. Inside here is the remote control pod. Then we push on there, and this will all come out together. This goes back into the key, we'll do that in a minute, and here is the pod with the two buttons on. If you look at these three buttons, just here is a place where you can put a screwdriver, undo that there, and there is your battery. Just pop the battery out using the screwdriver. It is a Cr1616, so to pop it back together, put your battery in and make sure it works. Then this here, you pop these back here, just be careful of this bit here doesn't break, because a lot of these break and then they don't stay in.

This here goes into here, and then you have the cover to put back on. This here is the electronic chip that starts the car, and it's just held on here by glue, it's very bad design really, so just watch out that that's still there. Then pop that there, close it up, and with my fat fingers do the screw up. That's it. Nice and easy.