1970s Rebar Cutter Restoration

I recently acquired a vintage rebar cutter from a used Japanese tool store.I'm not sure of the exact year of manufacture, but based on my research, machines of this type were produced by an old Japanese company since the 1970s. The machine was in a state of disrepair, completely covered in rust and unable to operate. Upon closer inspection during restoration, I found a fractured bearing race and several other components exhibiting severe rust and corrosion.Let's all watch the results together!
*Rebar Cutter Information *
Brand: ‎SCC
Model: EC-01
AC: 1 Phase
Hertz: 50 Hz
Voltage : ‎100 Volts
AMP: 9 A
Output power: 500W
No load speed: 17000 Rpm
Cutting diameter : 16mm
Blade Material : Metal
Product Dimensions : 470x 270x 170mm
Item Weight :20 kg
-------------------------
Timestamps:

00:00 Check the operation
00:21 preview
00:48 disassembling
13:23 cleaning the parts with the parts washer
14:27 reinstall the part for sandblasting
15:52 sandblasting
16:03 showing the sandblasted parts
17:17 restoring the body
18:47 restoring the machine head
20:00 blacken the screws
20:22 clean and check the rotor
21:08 clean and check the Stator
21:37 restoring the switch
25:24 install bearings
25:53 assemble the body gear
26:44 assemble rotor and stator
28:44 connect the power cord and switc
31:59 test run the electric motor
32:09 welding the domed cap on the tube
32:42 assemble the reduction gear
35:07 machine head assembly
37:37 reassemble the technical data sheet
38:58 pour engine oil
39:15 check the entire operation and test cut the steel
40:14 showing the finished restoration
-------------------------

Like and subscribe to support the channel ^^
Thank you so much for watching !!
Have a nice day ^^
#restoration #restorationvideos #restore #repairwork #MCC # #MCCEC-01 #ElectricRebarCutter #rebarcutter