Mixer Showers: "How to use Triton's bar mixer fixings for exposed pipework" video from Triton

Triton mixer showers - https://www.tritonshowers.co.uk/showe...
Triton mixer shower fixing kits - https://www.tritonshowers.co.uk/showe...

A short video explaining how to use Triton's bar mixer fixings for exposed pipework for bar mixer showers.

If you've ever struggled to fit a bar mixer shower or a wall mounted bath shower mixer using standard fittings, you'll appreciate the alternative fittings that Triton offer to make installation easier.

There are two solutions for built-in pipework -- one is using our easy-fit fixing bracket and the other is using our push on fittings.

Alternatively, we offer fittings for exposed pipework.

Here, we'll cover how to use the Triton fittings for exposed pipework.

The major benefit of these fittings is that unlike others there are no unsightly screws that secure them to the wall and they only require one hole drilling in the tile to fix them rather than three.

These fittings are for when you have exposed pipework running down or up the wall to the shower.

If installing to a stud wall or similar it is recommended that the brackets are secured to a wooden batten in the wall.

Decide on the mounting position of the brackets on the wall and mark the centres. Check the marks are level and that the distance between them is equal to the distance between the mixer inlet centres.

Drill through the tiles and secure the bracket mounting plates to the wall using the screws provided. The fixing hole in each mounting plate is elongated to allow some final adjustments to level the fittings.

Slide the brackets onto the mounting plates and secure them using the grub-screw in the fitting.

Slide the nut and olive onto the incoming pipework and fit the pipework into the bracket. Tighten the nut for a watertight seal.

The filters supplied in the box must be fitted. The flow restrictors that are also supplied only need to be fitted on high-pressure systems.

Push-fit the seals into the outlets.

Fit any of Triton's bar mixers by simply tightening the flat face unions on the valve to the connectors.

If this bracket isn't right for you then why not take a look at our other videos showing our easy- fit fixing bracket or our push-on fittings for built-in pipework.