Скачать или смотреть Analog to Digital Converter of AVR ATmega32 Microcontroller with LED Display by ABLab Solutions

In this project, we will convert an analog signal to digital signal using the Analog to Digital Converter of AVR ATmega32 microcontroller. The AVR ATmega32 has an inbuilt 8 channel, 10 bit analog to digital converter. Here, we will first convert a 5V signal and then a 0V signal with a reference voltage of 5V of ADC. After each conversion, the analog to digital converter of ATmega32 will give a 10-bit value for each signal (5V and 0V).These outputs of the analog to digital converter are displayed in a 1×8 LED array. When a 5V signal is converted, the output of analog to digital converter is 0x3ff (1023) and when 0V signal is converted, the output is 0x00 (0). But the LED array can display only 8-bit at a time. So, the 1×8 LED array will first display the lower 8-bit and then the upper 2-bit of the 10-bit digital output with a delay of 500ms.Download All the required project materials like C Code, Circuit diagram and PDF absolutely Free from the below link:-
http://www.ablab.in/how-to-use-adc-of...