Marzocchi 888 RC3 EVO V2 mountain bike fork full service - MARZOCCHI

Hi, Guys! In this video I show you full service of MARZOCCHI mountain bike front fork - Marzocchi 888 RC3 EVO V2 2014 ! Here we disassemble fork, inspect all parts, change oil and of course assemble it.
=- Do all operations shown in this video at your own risk!!! -=
Thanks for watching! Hope you enjoy! Rate, comment and SUBSCRIBE for more interesting stuff that I make for You!
Subscribe to my channel    / axrv88  
Follow me on Twitter   / axrv88  
Facebook page   / axrv88  
#AXRV88 #Marzocchi #service

0:00 Вступление
0:47 Unscrew bottom bolt and nut.
1:02 Remove upper adjustment knobs. Be careful with small balls under knobs.
1:38 Unscrew top caps.
2:56 With fast rotational movement unscrew bottom nut.
3:31 Remove RC3 cartridge.
4:02 Push old oil out from cartridge.
4:45 Unscrew spring rod bolt.
8:57 Legs is in Perfect condition after 3 years of usage! With right service gold coating works great!
9:40 Remove spring rod for cleaning and visual inspection.
10:21 Spring rod looks like new!
11:41 Install spring rod.
12:07 Fill seals with new grease which is not aggressive to rubber.
13:43 Screw in the spring rod bolt.
14:05 Clean RC3 cartridge out of old oll.
14:41 Install RC3 cartridge.
15:10 Screw nut to the RC3 cartridge.
15:41 Fill RC3 cartridge leg with 285ml of 7.5W synthetic fork oil.
16:48 Fill spring leg with 80ml of 7.5W synthetic fork oil. Do NOT use grease on spring!!!
17:13 Instal spring and spring tentioner.
18:17 Tighten bottom bolt and nut with 10Nm. DO NOT OVERTIGHTEN!
18:47 Instal O-ring and compression knob.
19:25 Small balls time! Put some grease Into hole with spring.
20:12 Instal air progression knob.
20:55 Instal rebound knob. Do not forget add grease to spring hole.
22:01 Instal spring tentioner knob. Do not forget add grease to spring hole.