How to use Brass Inserts on 3D Prints: make your own tips, cheap!

Straight and Flush: How to add Threaded Heat-Set Brass Inserts to your 3D Printed Parts without expensive tools - just a Soldering Iron and a Soldering Tip you can reshape at home!

Brass Inserts for 3D Prints - Knurled
https://geni.us/CkpmHm2 (on Amazon*)

TIPs for Brass Inserts, M900 soldering iron standard:
https://geni.us/GdoHBA (on Amazon*)

Soldering Iron:
110V 80W, 180ºC to 480ºC - US Plug:
https://geni.us/vwmEYZ (on Amazon*)
240V 80W, 180ºC to 480ºC - EU Plug:
https://geni.us/relPlL (on Amazon*)

Heat-Set Guiding Press Tool - if you really need vertical alignment:
https://geni.us/gBTbAy (on Amazon*)

* These are all Affiliate Links
As an Amazon Associate I earn from qualifying purchases.


Dr. Igor from My Tech Fun did the test!
Does using the bolt head make the insert stronger? Watch:
   • Even stronger Heat-Set Brass insertin...  


Chapters:
0:00 Brass Inserts got cheap
0:39 Inserts for Injection Molding vs 3D Printing
0:57 Assortment Kits vs Bags of 100
1:21 Soldering Iron
1:37 Special Tips
2:00 Make your own Tip
3:01 Flat and Straight
3:19 Wrong Way
3:38 Right Way
4:27 Secret Tool: Bolt
5:35 Arduino Kits

_______________________________________________
Written, Performed and Produced by Everson Siqueira