Logo video2dn
  • Сохранить видео с ютуба
  • Категории
    • Музыка
    • Кино и Анимация
    • Автомобили
    • Животные
    • Спорт
    • Путешествия
    • Игры
    • Люди и Блоги
    • Юмор
    • Развлечения
    • Новости и Политика
    • Howto и Стиль
    • Diy своими руками
    • Образование
    • Наука и Технологии
    • Некоммерческие Организации
  • О сайте

Скачать или смотреть Profile Plane maiden and crash....

  • PerkyPlanes & RC
  • 2019-08-02
  • 163
Profile Plane maiden and crash....
FTFlitetestfoamboardDTFBDIYcheap RC planetrainer3 channelRETdollar tree foamboardRC planeJosh BixlerFlitetest forumforumchallengeRCSaylorsdroneFAARCwingfuselagerudderelevatorthrottlebrushless motorlipolipo batteryPerkyplanes & RCPerkyplanesFlitetest communitydesignbeginnerintronewbieProfile PlaneCharles PirkeyThe NastyFT3DNastyscratch builtBuild-ruary ChallengeChallenge
  • ok logo

Скачать Profile Plane maiden and crash.... бесплатно в качестве 4к (2к / 1080p)

У нас вы можете скачать бесплатно Profile Plane maiden and crash.... или посмотреть видео с ютуба в максимальном доступном качестве.

Для скачивания выберите вариант из формы ниже:

  • Информация по загрузке:

Cкачать музыку Profile Plane maiden and crash.... бесплатно в формате MP3:

Если иконки загрузки не отобразились, ПОЖАЛУЙСТА, НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если у вас возникли трудности с загрузкой, пожалуйста, свяжитесь с нами по контактам, указанным в нижней части страницы.
Спасибо за использование сервиса video2dn.com

Описание к видео Profile Plane maiden and crash....

This the maiden flight and crash of the slim profile plane I brought up some months back. The plane is loosely based on the rcgroups scratchbuild "The Nasty" but built using foamboard. The fuselage and wing use most of a single sheet each by themselves and then a small piece for the horizontal stab/elevator. This is NOT an FT design however I did use the same horizontal stab/elevator as found on the FT3D. "The Nasty" is a Charles Pirkey design.

This plane was also my part of the Flitetest forum Build-ruary challenge in the month of February where any user who wanted to participate would try and build/fly 4 planes in a month. This is only 1 challenge of some of the other crazy challenges that happen over at the FT forums. For more info on forum user challenges, check out the Flitetest User Challenge subforum:

https://forum.flitetest.com/index.php...

I think this plane will prove to be an inexpensive teaching tool for doing more advanced manuevers.

Electronics:
Racestar 1000KV brushless motor
30A ESC
3 x 9g servos

I programmed in 3 different rates (low, middle, high) into the plane because I wasn't sure how sensitive it'd be. The rates are set at 30%, 50%, and 70%. For this flight I started out at 50%.

One thing about this plane is I wasn't sure I had it balanced correctly. I had never tried balancing a plane with such a unique designed wing plus I wasn't 100% where my CG point was when I shrunk down the plans to accommodate foamboard size. In the end though, I think the plane ended up being tail heavy and believe that was the cause for the crash. I was pulling back on the elevator stick but was not going anywhere but down.

I should be able to easily trace the fuselage back out on new foamboard and rebuild the plane very easily.

Other Links:
Flitetest Forums: https://forum.flitetest.com/index.php
RCGroups Forums: https://www.rcgroups.com/forums/index...
RCGroups Thread on "The Nasty": https://www.rcgroups.com/forums/showt...
Flitetest FT3D: https://www.flitetest.com/articles/ft...
RCGroups Scratchbuilt Forums: https://www.rcgroups.com/foamies-scra...


Perkyplanes & RC Facebook group:
  / 293560944574765  



Vlog Channel:
   / @wikiperkya1103  


Music:
Bayou State Of Mind (Sting) - Jingle Punks
Artist: http://www.twinmusicom.org/

Комментарии

Информация по комментариям в разработке

Похожие видео

  • О нас
  • Контакты
  • Отказ от ответственности - Disclaimer
  • Условия использования сайта - TOS
  • Политика конфиденциальности

video2dn Copyright © 2023 - 2025

Контакты для правообладателей [email protected]