EGR Valve and EGR Cooler Replacement - Chevy Silverado 2500

This video goes over how to replace the EGR valve and EGR cooler on a Chevy Silverado 2500 6.6L.

Approximate Time: 7 Hours
Tools needed: 12mm Socket short and deep, 14mm socket short and deep, 3/8 and 1/4 ratchet,
Additional parts: 10mm socket, 8mm socket, 6mm socket, 14mm box wrench, straight pick, pry bar, 3" and 6" extension, flathead screwdriver, 2 needle nose vice grips.

Vehicle used: 2006 Chevy Truck Silverado 2500

Installation Notes: EGR valve bolts torque to 15 ft lb /// new EGR gasket required /// cooler tube removal and replace necessary.

Motorist: If this job is beyond your skill level, visit your automotive service professional.This video is for general information purposes only. The provider makes no representations or warranties as to the information contained in this video or its usage, completeness, quality or accuracy. Any use of such information is at the user's sole risk, and in no event shall the provider be liable for any consequential, incidental, special, punitive or direct or indirect damages arising from such use.

Learn more at: http://www.StandardBrand.com