Setup of GNSS M2Base Station Kit for Emlid Reach M2

M2BASE | BASE STATION KIT FOR REACH M2
Best Low Cost L1 / L2 GNSS Receiver Kit to Use with Module Reach M2.

The M2BASE is a comprehensive kit and solution that allows you to convert the module Reach M2 by Emlid in a Multiband Base Station Receiver, bolt-on to any universal tripod for GNSS receivers. It is a modular system that allows you to easily insert the Reach M2 and a Radio LoRa (optional for the case of RTK multiband registration) using routed cabling so that the Reach M2 plugged in and can be powered properly. The Kit allows easy insertion and removal of the Reach M2.

HIGH PRECISION GNSS MULTIBAND ANTENNA:
The most interesting thing about our M2BASE Kit is our new module compatible High Precision Ceramic Patch Antenna Emlid Reach M2 which allows you to quickly get centimeter accuracy in Single/PPK/RTK mode:

Gain:
B2/L2/G2/B3/E5b/E6：42±2dB
B1/L1/G1/E1/E2：40±2dB
Horizontal coverage angle 360 ​​degrees | Vertical coverage angle 5 – 90 degrees | Noise figure ≤1.5dB | Current consumption ≤50mA | Operating environment temperature -40℃ to 85℃ | IP67 protection

The System has:
1. Exclusive Multiband GNSS Antenna with High Accuracy and Gain
2. A cooling system with a low consumption 5V DC fan controlled by a temperature sensor PCB that permanently measures the temperature of the Reach M2.
3. A set of Lithium Ion batteries with 10,000mAh capacity. Tested for an estimated working time of 10 hours.
4. Internal wiring ready to connect the module Reach M2 (Does not include connection cable between M2 and Radio LoRA).
5. 5/8 ″ thread for GNSS tripod.
6. Physical characteristics of the kit: Weight: 350g ± 10g. Dimensions: 130 x 80 x 80 mm