Скачать или смотреть Engrave-A-Crete: Mongoose 3

Design

Meet the newest member of the famous Mongoose™ family of decorative concrete engravers. The Mongoose 3 features innovative three-wheel design coupled with the quality, dependability and versatility people have come to expect from the Mongoose name.

Accuracy

Front and rear pointers make following chalk lines a cinch. Easily visible ledge near the blade port allows operator to mark exactly where cut begins based on blade wear, reducing over or under cutting at intersections. Pointers flip up and out of the way when not in use.

Safety

Strategically placed vacuum port captures dust at the point of cutting, greatly reducing dangerous, lung-damaging airborne silica particles. Blade is visible, but housed within the tool to prevent vicious accidents.

Power

10,000 RPM motor is specifically tuned to match the blade resulting in more torque while cutting and less kerf ramp when ending cuts.

Ease of Use

Spring-loaded cutting head gives the operator full control of starts and stops. Simply push down to cut, then release and the blade pops out of the cut. Wide wheels provide the stability you need and the adjustable wheel base adds flexibility. Comes equipped with one .090 (approximately 3/32") diamond blade.

The Mongoose 3 is the smallest decorative concrete saw that Engrave-A-Crete manufactures. Perfect for cutting tight free form curves,perfect circles (when attached to the optional center pivot) and straight lines.

Visit http://www.engraveacrete.com for more information