How to Mod Plate Stabilizer? & What is Tape Mod? | Melgeek Mojo68 Disassemble & Mods

Hello!
Some of my subscribers asked me how to disassemble mojo68
and how to mod the stabilizer :)

In the 'Modding Plate Stabilizer' section, I tend to put O-rings on the iron core.
When inserting the O-ring, make sure there is enough space between the plate and the PCB,
and if there is interference, remove the O-ring.
(In the video, only the space bar was fitted with an O-ring)

Tape mode makes the sound a little more poppy.
Listen and if you like it, you should try it too!

==== time stamp: ====
00:00 Intro
00:30 Unboxing ( You can skip this section)
01:19 You will probably like this section
01:26 Typing Sounds: Before
02:35 Modding Plate Stabilizers
06:02 Disassemble Mojo68
07:01 Tape Mod
07:22 Assemble
08:04 Outlook
08:22 Typing Sounds: After
08:28 Before After Comparison
08:41 Typing Sounds
10:22 Outro

==== specs: ====
Keyboard: Melgeek Mojo68 Plastic
Plate: Stock
Keycaps: ePBT GOK BOW R2
Switch: Everglide Aquaking (Lubed)
Mic: MXL 990
Audio Interface: MOTU M2

==== special thanks to: ====
BGM from : https://www.bgmpresident.com/