New Mods for my RnineT Pure: Rizoma Handlebars and Bar End Turn Signals!

0:00 Intro.
0:49 Unscrew everything on the handlebars with a socket wrench.
2:22 Unscrew the stock turn signals and disconnect from the main connectors. Use a zip tie cutter to better access the main connectors.
2:41 Slide Rizoma handlebars into the yoke and mark with a white marker where the holes are located.
3:55 Use clamps and drill holes.
4:35 Slide in the left hand grip and insert adapter into the hole.
4:50 Place the handlebars on the bike with the yoke and slide in the right hand grip and insert adapter into the hole.
5:14 Install the bar end mirrors on the adapters, and slide in turn signal light wires into the hole. Screw in the levers as well.
6:40 Pull the bar end turn signal light wires through the hole in the middle of the handlebars and crimp the ends with a crimper tool.
7:08 Pull the crimped ends through the middle and connect to the main connectors.
7:35 All finished.
7:46 Final thoughts.

Rizoma handlebars: https://www.revzilla.com/motorcycle/r...

Rizoma bar end turn signals: https://www.revzilla.com/motorcycle/r...

Rizoma bar end mirror turn signal adapter: https://www.revzilla.com/motorcycle/r...

BMW motorcycle repair manual: https://www.amazon.com/gp/product/178...

Connect with me:
🔔 CLICK HERE TO SUBSCRIBE TO THIS CHANNEL ➜    / williamtwon  
📸 Instagram ➜   / williamtwon  
🎥 TikTok ➜   / williamtwon  
💻 Facebook ➜   / williamtwon