Скачать или смотреть Powerol Heavy Duty Block Cutting Machine - The Powerhouse: "Built for Speed. Designed for Precision

The Heart of a High-Capacity AAC Block Plant.
Contact us at
E : [email protected]
M : +91 9790785958
W : https://powerol.com/

We manufacture the India's Most Advanced Fully Automatic, Heavy-Duty AAC Block Cutting Machine, you are moving from simple "production" to "industrial-scale manufacturing."

For high-capacity plants (producing 500+ m³ per day), the benefits center on Cycle Time and Tolerance Control.

1. Production Speed & Throughput
Simultaneous Cutting: Heavy-duty automatic models perform horizontal (thickness) and vertical (length/width) cutting simultaneously or in a rapid synchronized sequence, drastically reducing the cycle time per cake (often to under 4 minutes).

No "Bottle-Neck": In high-capacity plants, the autoclave is usually the bottleneck. A heavy-duty cutter ensures the green cake is always ready and waiting for the autoclave, maximizing your steam curing capacity.

Continuous Operation: Designed for 24/7 operation with robust motors (e.g., 3-phase, high kW) that don't overheat under constant load.

2. Superior Dimensional Accuracy (The "Heavy Duty" Advantage)
Vibration Elimination: "Heavy Duty" refers to the rigid steel frame construction (often using large rectangular tubes). This mass absorbs the vibration of the oscillating wires.

Result: smoother block surfaces and tolerances within ±1mm.

Wire Tension Stability: Automatic pneumatic or hydraulic tensioning keeps cutting wires perfectly taut, preventing the "bowing" effect that causes blocks to be thicker in the middle than at the ends.

3. Integrated Waste Management (Zero Wastage)
Automated Recycling: These machines automatically slice off the top crust and bottom waste (as discussed previously) and immediately route it back to the slurry tank via a screw conveyor or slurry pit.

Clean Edges: High-speed oscillating wires produce sharp corners, reducing the "broken edge" waste that often occurs with manual or semi-auto handling.

4. Labor & Safety
One-Touch Operation: A single operator can monitor the entire cutting section via a PLC (Touch Screen) panel.

Safety Interlocks: Heavy-duty models come with perimeter sensors; if a person enters the cutting zone, the machine halts immediately.