Parallel Counterflow Chiller part 1 of 3

Parallel Counterflow Chiller part 1 of 3

Introduction to the theory behind the Parallel Counterflow Chiller, and the parts that I have used.

1/2” to 20mm Conduit Joiners -
http://www.ebay.com/itm/20mm-Slip-x-1...

1/2” NPT compression fitting -
http://www.ebay.com/itm/5PCS-New-Bras...

I use Marley Pressure Pipe S1 PVC-U DN20 PN15 and the matching T joints for all other pipe work.

Marley products are NZ based and are available plumbing supplies. I suggest taking your 20mm Conduit Joiner along and test fit to make sure the inside diameter of your chosen PVC pressure pipe has a tight fit with the outside diameter of the conduit joiner.

Part 1 -    • Parallel Counterflow Chiller part 1 of 3  
Part 2 -    • Parallel Counterflow Chiller part 2 of 3  
Part 3 -    • Parallel Counterflow Chiller part 3 of 3  
Drilling compression fittings -    • Compression fitting drill out, tip in...  

subscribe and share your homebrew experience with http://www.youtube.com/subscription_c...

website http://www.another1.co.nz
twitter   / time4another1  

Great t-Shirt up for grabs http://www.redbubble.com/people/another1

Music: Warp11, Red Alert https://itunes.apple.com/nz/album/red... Permission to use granted by Karl Miller of Warp11.