How to Replace 5.4L Intake Manifold Gaskets 2007-2017 Ford Expedition

Описание к видео How to Replace 5.4L Intake Manifold Gaskets 2007-2017 Ford Expedition

For More Info visit us at: http://1aau.to/h/cmK/

Worn or leaking intake manifold gaskets can cause a host of problems, from letting in unmetered air, to reducing vacuum pressure. If your intake manifold gaskets need replacing, you can do it yourself! This video shows you how to install new intake manifold gaskets on your 2007-2017 Ford Expedition 5.4L.

• Check here for more videos on the 2007-17 Ford Expedition:    • Ford Expedition 3rd Generation 2007-17  

This repair was done on a 2010 Ford Expedition XLT 5.4L Sport Utility 4-Door Automatic and the process should be similar on the following vehicles:
2007 Ford Expedition
2008 Ford Expedition
2009 Ford Expedition
2010 Ford Expedition
2011 Ford Expedition
2012 Ford Expedition
2013 Ford Expedition
2014 Ford Expedition
2015 Ford Expedition
2016 Ford Expedition
2017 Ford Expedition

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/o6V/1AXAA00013
• Pocket Screwdriver
• 10mm Wrench http://1aau.to/osr/1AXAA00010
• 8mm Socket http://1aau.to/oWx/1AXAA00017
• Air Blow Gun
• Serpentine Belt Tensioner Tool http://1aau.to/oaD/1AXAA00019
• Trim Tool Set http://1aau.to/ovU/1AXXX00006
• Vacuum
• Hose Pinch-Off Pliers
• Pliers
• Socket Driver
• Socket Extensions http://1aau.to/o6y/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oIY/1AXAA00044
• Paper Towels http://1aau.to/okA/1AXSS00035
• Pick http://1aau.to/ooo/1AXAA00037
• Razor Blade / Gasket Scraper
• Rubber Mallet

Subscribe:    / @trq  

Check out our playlist:
Ford Expedition 3rd Generation 2007-17:    • Ford Expedition 3rd Generation 2007-17  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке