How to Replace Rear Ride Leveling Height Sensors 2015-2020 Cadillac Escalade

Buy Now!
New Ride Leveling Height Sensor from 1AAuto.com http://1aau.to/ia/1ASLS00033

This video shows you how to install new rear ride leveling height sensors from TRQ on your 2015-2020 Cadillac Escalade.

This process should be similar on the following vehicles:
2015 Cadillac Escalade
2016 Cadillac Escalade
2017 Cadillac Escalade
2018 Cadillac Escalade
2019 Cadillac Escalade
2020 Cadillac Escalade

Tools you will need:
• 13mm Wrench http://1aau.to/oWf/1AXAA00010
• 13mm Socket http://1aau.to/obwg/1AXAA00015
• 22mm Socket http://1aau.to/ooB/1AXAA00266
• Trim Tool Set http://1aau.to/oacI/1AXXX00006
• Wheel Lock Key
• 1/2 Inch Ratchet http://1aau.to/oahP/1AXAA00043
• 1/4 Inch Ratchet http://1aau.to/obcf/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/obwg/1AXAA00015
• Torque Wrench http://1aau.to/oaFI/1AXAA00044
• Gloves http://1aau.to/o9y/1AXSS00048
• Safety Glasses http://1aau.to/o2I/1AXAA00343

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.