Easy Install of Dryer Vent, Ducting, and Bracing

Follow this step-by-step dryer venting install. This was a long run for a dryer vent...not typical. However, we swapped out the incorrect metal downspouts that were used as vent pipe with proper HVAC vent pipes and junctions. All vent pipe was secured to the floor joists with multi-use metal bracing straps.

Thank you so much for watching and be sure to like, subscribe, and press the bell for notifications on all of our upcoming videos.

Honey Bee by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/...

Source: http://incompetech.com/music/royalty-...

Artist: http://incompetech.com/

0:00 Introduction
1:27 Oversized Hole needs Proper flange to cover gap
1:51 Screw to floor With wood screws
2:03 DAP interior Caulk around Flange
2:15 Demo out existing pipe
2:27 Measuring pipe length To clear existing duct work
2:53 Vent pipe clicks together
3:19 Cut pipe to length to clear existing duct work
3:39 Attach metal HVAC duct strap
3:46 Attach ducting tape to elbow
4:04 More HVAC dueting tap at each connection
4:35 Attach HVAC strap to 2 x 4
4:45 Bracing was added for this install to secure pipe
6:30 Nail marks at all 4 corners
6:40 Masonry bit
7:00 Insert plastic anchors
7:06 Attach exterior vent tape with HVAC ducting tape
7:14 Install through hole
7:22 Install screws
7:39 Fitting pipe for final elbow
8:16 Extra strapping for security