This Part Could Literally Save Your BMW Engine!

In this video I show you how to install a critical upgrade on your BMW.
I upgrade to a full oil pressure gauge on my 2008 BMW E90 335i with the N54 engine.

Upgrading to a true oil pressure sensor on your BMW could save you a lot of money if it potentially saves your motor.

I install an AEM 100 PSI oil pressure sensor in this video.

If you want to mimic my setup you would need the following parts:

Aftermarket oil cooler (affiliate):

http://ebay.us/O6BbPS

OEM O-Rings for oil cooler (affiliate):

https://bit.ly/39fUe77

P3 Gauge (affiliate):

https://bit.ly/396mXg6

The adapter for the oil pressure sensor (affiliate):

https://amzn.to/3qt3rR3

The pressure sensor kit (affiliate):

https://amzn.to/3tUGnfS

If you have a factory oil cooler you can get the following adapter instead (not an affiliate):

https://vargasturbo.com/product/vtt-b...

If you want to install an aftermarket gauge you can use the following gauge pod (affiliate):

https://bit.ly/3aeUEMH

Here is a 45 mm oil pressure gauge that could work in that vent pod and with that sensor (affiliate):

https://amzn.to/3aVodC6

If this is the first video you are catching of mine please consider subscribing. I upload regularly.

Thanks for watching :)

When you see the word "affiliate" listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it's a win all around :) Thank you!