How To: Bleed a Hydraulic Throwout Bearing - Mantic Clutch USA

This is the best way to bleed the T/O bearing. We receive many phone calls on how to properly bleed the hydraulic bearing, so here is our tech video. The sprung type OE style hydraulic bearing in the video is the same style used in our Ford Mustang and Dodge clutch upgrade kits.

The "Urban Legend" is to pump the pedal 1 million times to let the air out, this simply is not the case. We suggest bleediing the slave cylinder while on the bench before the installation on the vehicle. The bearing must be bleed for the system to work correctly.

Tech Tip: Use a short length of rubber hose and small cup of fluid to remove air from the throwout bearing (watch the video).

Be sure to watch our other clutch bearing video explaining "All about Air-Gap" here    • Hyrdraulic Throwout Bearing "NO" Air ...  


Visit our Website:
https://manticclutchusa.com/

Facebook:
  / manticclutchusa  

Instagram:
  / manticclutchusa  

Twitter:
https://twitter.com/manticclutchusa?l...


"In Clutch We Trust"