How to Replace Knock Sensor 1997-2003 Ford F-150

Buy Now!
New Engine Knock Sensor from 1AAuto.com http://1aau.to/ib/1AEKS00035

This video shows you how to install a new knock sensor in your 1997-2003 Ford F-150. A knock sensor monitors your vehicle’s engine for unusual pulsations caused by things such as engine knock. If a sensor is damaged or malfunctioning, the engine may run poorly, inefficiently, or only in a low speed safe mode, and may also trigger diagnostic codes.

This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa58/1AXAA00013
• Pocket Screwdriver
• 8mm Wrench http://1aau.to/ogA/1AXAA00011
• 10mm Deep Socket
• 19mm Socket http://1aau.to/o5b/1AXAA00043
• 7mm Socket http://1aau.to/oaQC/1AXAA00017
• 8mm Socket http://1aau.to/oaQC/1AXAA00017
• Fuel Line Disconnect Tool http://1aau.to/oG/1AXAA00041
• Pliers
• Ratchet http://1aau.to/obiY/1AXAA00016
• Socket Extensions http://1aau.to/oa8e/1AXAA00015
• Razor Blade / Gasket Scraper http://1aau.to/ohq/1AXAA00280

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.