Скачать или смотреть Gate restoration

I recently found this gate on a bonfire pile and liked the design, although there was some damage it appeared to be quite solid so I brought it home. To restore the gate I started by removing all the slats from the front, the frame was solid so I did not want to dismantle it further so I cut the fame down to size as one piece, I spent some time off camera selecting the nicest slats to refit to the gate, and cut off any rotted ends, after making sure I had sufficient slats I started screwing them in place making sure they had even spacing. With the slats secure I trimmed off any overhang flush with the frame, I then finished it with a coat of paint.
Despite not having everything I needed I decided to install the gate in its new position, I removed the fence post that was in the way and put in a temporary post for the latch side, I then installed a large square post for the hinge side using brick rubble to secure the post. I cut the fence and secured it to the hinge post, I then hung the gate on its hinges, the gate area will require some further work but for now it is useable.