How to replace Oil Diptstick Tube (Cracked, Broken, Rusted Stuck) | Ford Expedition EL 5.4L 3V

#DIY #auto #repair #Ford

Consider buying us a coffee and subscribing as a member: https://www.buymeacoffee.com/DIYorDIE

How to move and replace oil dipstick tube from a Ford Expedition EL 5.4L 3V engine. My oil dispstick tube was broken, it had a crack in the middle of the tube. It was also rusted and the tube was stuck to the engine block. Follow along to see the method I used to get the rusty oil dipstick tube unstuck using a propane torch and rust penetrant oil. I also show how to install new oil dipstick tube in Ford 5.4L 3V engine. Can be done without removing oil drain pan. Just requires lots of patience and a propane torch.

As an Amazon Affiliate I earn from qualifying purchases.

Tools and Parts I used for this job:

Oil Dipstick Tube - https://amzn.to/455THj9

Replacement Dipstick - https://amzn.to/3rms7QN

1/4" Flexhead Ratchet - https://amzn.to/3PQaL8n

WD-40 Rust penetrant - https://amzn.to/3LBa9Rj

Self igniting propane torch kit - https://amzn.to/3PvN2IX

Blue shop towels - https://www.amazon.com/dp/B07F3WLKCP/...

Large 8mil Nitrile Gloves - https://amzn.to/3rovLtq