Click for more info and reviews of this PTC Cabin Air Filter:
https://www.etrailer.com/Cabin-Air-Fi...
Check out some similar Cabin Air Filter options:
https://www.etrailer.com/cabfilter.htm
Search for other popular Jeep Grand Cherokee parts and accessories:
https://www.etrailer.com/vehicle/2018...
https://www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: https://www.etrailer.com/tv-install-p...
Rob C: Hey, everybody. Rob, here at etrailer.com. And today we're going to be taking a look at the PTC custom fit cabin air filter on our 2018 Jeep Grand Cherokee. Now, what a cabin air filter is going to do for your car is the same thing that a furnace filter does for your house. It's going to filter all the air coming in, go through the filter and make sure it's clean and free of any kind of pollen, debris, or pollutants before it comes through our vents.Now, a lot of people don't even realize the vehicle has a cabin filter, but most new vehicles, really anytime after about 2008, most of them have a cabin filter, and most of them are extremely easy to access, but they can be forgotten. And if you do forget to change, or at least even check your filter, it can cause a lot of problems down the road.
There'll be a buildup of pressure inside your AC system, which can do damage. As well as any debris that can go past the filter, maybe did not get caught, ends up making a lot of noise inside the fan.So, either way, it's just one of those maintenance items that we do need to keep track of, and at least check it. Now, the manufacturer does recommend checking, if not changing, your filter about every 12,000 miles, but you can double check your owner's manual if you need a more specific time. Now, I know we've all been to the service center, and we've been offered to have our cabin filter replaced, but really there's no reason to pay somebody to do it because it is an extremely easy job, even on our Grand Cherokee. In fact, we have a new one here, so if we need to change ours, we can put the new one in, but let's go ahead and check it together and I'll show you exactly how to do it.So, the first thing you want to do is, you want to come to the passenger side and open up the glove box.
Now, you can empty out your glove box. It's going to make it a little bit easier, so we don't have to worry about anything falling down. But if we look on the inside toward the passenger side, there's a little black circle right on the inside of the glove box. That circle's actually attached to this little tab. It's got a string on it.
So, we're going to grab that string, kind of lift up on the glove box, and you're going to slide that down. That way we can remove that clip, just slides in the hole, and we can pop it out, you can actually let go of the string.Now, we have two tabs that are holding the glove box, preventing it from coming down anymore. So, we need to press in on the two sides of the glove box. Just flex it a little bit so we can get them to come down. It is a little tight, so I try to get one side loose, move to the other side, kind of push in.
You can see the glove box will rotate down. It'll come right off of those hooks at the bottom. Let me just set this on the floorboard for now.And if we look right underneath that upper section of the housing, we'll find a cover that's back there. And towards the driver's side, we're going to have a tab, you want to press in on that tab, kind of pull outward. And if we move over towards the center a little bit, it's hard to see, but there's another tab, may have to kind of pull on that tab a little bit to get it to release. And then on the passenger side, you kind of want to push the cover over, because that's not a tab, but it's actually just hooked in there.Now, you can see that's going to expose our filter behind that cover. One thing I do want to mention before we pull it out, is we want to pay attention to the arrows that are on the filter, since they're visible here. They're pointing down, and that's going to be the direction of air flow. So, we want to pay attention to that before we pull it out, so we can put the new one in the correct orientation.We'll grab our filter, pull it out. Not horribly dirty, but especially right here, you can see that there's a line where it's starting to turn darker gray. And if we open up some of the pleats, you can see it is catching some larger debris, and we see it's starting to build up in there. It's not horrible, but since we have a new one, we can go ahead and change it.We'll grab our new filter. And again, we can see those arrows, so we do want to make sure that it's pointing down just like the other one. And this is just going to go in the exact same way that it came out. Just line our filter up. Going to slide it into place. And
Информация по комментариям в разработке