DIY spot welding machine from old microwave transformer

Making DIY spot welder with pulse timing control and old microwave oven trafo.
In this video I used double layer of 8 AWG (10mm) wire for the secondary winding of the transformer.
Output voltage is 2.5 volt and LOTS OF AMPERE!
There is a cheap module to control the impulse timing. It can be set for specific cases.
Name of the module to control the impulse: XY-J02 (from AliExpress).
Here is a link (I hope it is still working when you read this): https://www.aliexpress.com/item/10050...
---------------------------------
More videos in my channel: ‪@FixitEasyDIY‬
--------------------------------
Chapters:
00:00 Intro
00:14 Taking transformer from old microwave
00:49 Measuring primary coil of the trafo
00:56 Removing secondary coil of the transformer
01:36 Making high amp coil of the welding machine
02:02 Soldering terminals of the cables
02:24 Making wooden inclosure of the spot welder
04:21 Installing the transformer for the spot welding machine
04:37 Making electrodes for the welder
05:14 Making handle for the welding machine
07:39 Connecting probes to the cables
08:15 Wiring of spot welder
09:03 Installing pulse control of the spot welding machine
11:14 Testing the spot welding machine
------------------------------------------------
More from @Fixiteasy ↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️↙️

DIY portable Smoke / Fog Machine | Tons of smoke from old hairdryer
➡️   • DIY portable Smoke / Fog Machine | To...  

How to power Phone Forever Without Battery
➡️   • How to power Phone Forever Without Ba...  

DIY Spy Mic - How to build and test in real life | Ultra long distance microphone
➡️   • DIY Spy Mic - How to build and test i...  

DIY ultra long range WiFi directional antenna using thin can and old router
➡️   • DIY ultra long range WiFi directional...  

DIY Spy Microphone from old light Bulb - Listening trough walls with this mic
➡️   • DIY Spy Microphone from old light Bul...  

How to control 2 DC motors with ESP32 and L298N with mobile phone and Blynk app
➡️   • How to control 2 DC motors with ESP32...  

DIY Electric Screwdriver from old PC mouse and vape cigarette with reverse switch and type C USB
➡️   • DIY Electric Screwdriver from old PC ...  

DIY Night Vision Camera from Old Phone
➡️   • DIY Night Vision Camera from Old Phone  

DIY spot welding machine from old microwave transformer
➡️   • DIY spot welding machine from old mic...  

DIY regulated power supply with Buck Boost ZK-4KX module:
➡️   • DIY regulated power supply with Buck ...  

DIY Work Light using power tool battery
➡️   • DIY Work Light using power tool battery  

DIY Bluetooth speakers with Class-D amplifier
➡️   • DIY Bluetooth speakers with Class-D a...  

PARKSIDE Portable Power Station with X20 battery
➡️   • PARKSIDE Portable Power Station with ...  

DIY battery powered Power supply using RIDEN RK6006 and 18650 batteries
➡️   • DIY battery powered Power supply usin...  

How to connect Stepper motor with 6 wires to 4 wire driver / controller
➡️   • How to connect Stepper motor with 6 w...  

DIY ultra long range Mic from Satellite dish
➡️   • DIY ultra long range Mic from Satelli...  

DIY Brushless BLDC motor from old CD-ROM drive
➡️   • DIY Brushless BLDC motor from old CD-...  

And many more ! :)
Hashtags:
#diy
#spotwelder
#spotwelding
---------------------------