DRAMA Whilst Extending the Falling Derrick - Tower Project

I nearly lost the tower today! We upgraded the falling derrick, dropped the tower down, added a T piece for the tower to rest on when down and a few other odds and ends.

FAQ
1. No gloves. Correct, I can always let go rather than get tangled in clothing
2. The slot at the base is fine there is no sideways or twisting pressure here only downward pressure
3. The lines will be changed once I have prototyped this (read description!)
4. G- 450 Rotator has a spec of 200kg downward force. Create RC5-1 is 400kg. We'll fix the Create
5. Marine hardware and pulleys are better. Yes they are (cost!) but this is a cheap prototype
6. You don't have help? No - what would the other person do other than get in the way?
7. Edge-trim. Now sourced, thanks.
8. The music is listed below
9. Twisting pulleys will get fix on next upgrade
10. Still worried about the rotator? Don't be
11. Yes - some day we'll get a winch. Hang on
12. Detuning the mast from 40m - won't coax and ethernet cock calculation up? Maybe - but I still need to detune the mast.
13. Yagi is off by 1.8 degrees. Yes - not checked before lift. Fixed next time it's down
13. Does the PoE Ethernet up the pole generate any noise? No.