Ducati Panigale Eccentric Hub Full Restoration

A complete how-to on rebuilding the rear hub on a Panigale 1199 single sided swingarm. All bearings and seals changed. A little machining work too.

Bearing Driver Install Tool:
https://www.trodesigns.com/collection...

Bearing Puller Tool: https://amzn.to/3lP6IbV
It's a little expensive but it has the perfect size tips on the puller arms to grip onto the needle bearing - there's not a lot of area to catch onto.

Circlip Pliers for the Big Ass Clip: https://amzn.to/39vseg4
This thing takes A LOT of effort to remove, so you'll need these or something similar. I tried using normal sized ones and thought the tips would snap off.

The Ducati Rear Wheel Socket I use: https://amzn.to/3lQIAGd

Waterproof Marine Grease for Eccentric Hub/Roller Needle Bearings: https://amzn.to/2VYQPXB

Bearings/Seals needed for the Complete job:
(1X) https://www.123bearing.eu/bearings-RN...
(1X) https://www.123bearing.eu/bearings-BA...
(1X) Ducati Part # 93010102A - DUST COVER

Chapters:

00:00 Intro
00:48 Grinding away the Seized Bracket
01:38 Remove Hub
03:06 Disassemble Brake Rotor Assembly
03:42 Disassemble Hub
04:55 Comparing Old vs. New Caliper Brackets
06:02 Polish Rear Axle on Lathe
07:35 Remove Needle Roller Bearing & Seal
08:04 Remove Spacer
08:21 Remove Ball Bearing
08:55 Machine (turn) Bearing Installation Tool
09:51 Install New Ball Bearing
10:24 Install Spacer
10:38 Install New Needle Roller Bearing
11:22 Tap (chase) Rotor Screw Threads on Axle
12:20 Install Brake Rotor and ABS Ring
13:40 Expand Hub Recess
14:06 Install New Seal
14:43 Install Hub
15:24 Install Brake Caliper Bracket
16:08 Install ABS Sensor
16:37 Install Axle
17:00 Install Rear Brake Caliper
17:35 Install Rear Sprocket
18:02 Tension Chain
18:13 Torque Hub Clamp Screws
19:00 Install Rear Wheel
20:06 Engine Start up
20:40 Test Ride