Oscilloscope DSO152 | Mini Oscilloscope | Pocket Oscilloscope | Handheld Oscilloscope | Arduino PWM

Описание к видео Oscilloscope DSO152 | Mini Oscilloscope | Pocket Oscilloscope | Handheld Oscilloscope | Arduino PWM

Oscilloscope DSO152 Mini Oscilloscope Pocket Oscilloscope Handheld Oscilloscope by Fnirsi

Article:
https://www.electroniclinic.com/oscil...

Related video:
Raspberry Pi Pico Oscilloscope, DIY Oscilloscope:
   • Raspberry Pi Pico Oscilloscope for yo...  

Watch the same video in Hindi Urdu:
   • DSO152 Oscilloscope full review and t...  


Support me on Patreon and get access to hundreds of projects:
  / electroniclinic  

Subscribe to my New YouTube Channel, if you want to watch my videos in Hindi/Urdu
   / @letsgetstartedd  



Project Description:
****
Today, I have got something quite exciting for all the electronics enthusiasts– a brand new Mini Pocket handheld oscilloscope the DSO152 by Fnirsi. DSO stands for Digital Storage Oscilloscope. So, it’s a digital oscilloscope that can measure and record electrical signals. It converts the analog signal into a digital format and stores it in its digital memory, allowing for easy recall and analysis.
DSO152 is a highly practical and cost-effective handheld Oscilloscope launched by Fnirsi, which is aimed at the maintenance industry and the research education industry. The Oscilloscope has a real-time sampling rate of 2.5MS/s, a bandwidth of 200KHz, and complete trigger functions (single, normal, and automatic). It can be used freely for both periodic analog signals and non-periodic digital signals, and can measure voltages up to ±400V.

The screen is 2.8-inch 320x240 resolution high-definition LCD screen.
It has a built-in 1000mAh high-quality lithium battery, that can be used continuously for about 4 hours after fully charged.

On the left side, you can find the reset hole, charging indicator light, during the charging its Red and when the battery is fully charged then the green LED is turned ON. And this is the Type-C charging interface (5V/1A).

On the tope, this is for the Signal input probe (MXC) interface, this is for the Square Wave Calibration, and this is a trackwheel button; it serves multiple purposes. Short press left or right to scroll through different parameters function selection. And if you short press this button; it will exit the auto calibration.

There is nothing on the right side.

The AUTO button is used for the Automatic adjustment.

The MODE button also serves multiple purposes. If you short press this button you can select AUTO, Single, and Normal switching. And if you long press this button you can switch between the Rising edge or falling edge switching.

These up and down arrows are used for the Parameter addition and subtraction adjustment.

Run button also serves multiple purposes. Short press this button to Run/Pause waveforms. If you long press this button it will show or hide the detailed parameters.
****


Amazon Purchase links:
********

DSO152 Oscilloscope:
https://amzn.to/3Tn0Gl7

Aliexpress:
https://s.click.aliexpress.com/e/_ons...

Other must-have Tools and Components:

Arduino Nano USB-C Type ( recommended):
https://amzn.to/4ahGLdk

Top Arduino Sensors:
https://amzn.to/3vZbnfM

Super Starter kit for Beginners
https://amzn.to/3cq56C5

Top Oscilloscopes
https://amzn.to/3ctF3d8

Variable Supply:
https://amzn.to/2PEAqE7

Digital Multimeter:
https://amzn.to/2QGRPg1

Top Soldering iron kits: "best"
https://amzn.to/39nqDtb

Top Portable drill machines:
https://amzn.to/3suQMh7

Jumper Wires:
https://amzn.to/2NYPEDA

3D printers:
https://amzn.to/3ruG1dt

CNC Machines:
https://amzn.to/3cuZWVv

Electronics Accessories:
https://amzn.to/3sueV7z

Hardware Tools:
https://amzn.to/3m9UhaN


DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
For more Projects and tutorials visit my Websites

Electronic Clinic:
https://www.electroniclinic.com/

Programming Digest:
https://programmingdigest.com/

Follow me on Instagram:
  / electroniclinic  

Follow my Facebook Page Electronic Clinic:
https://web.facebook.com/profile.php?...

Follow my Facebook Group, Arduino Projects:
  / 190031841821771  

Email:
[email protected]

About the Electronic Clinic:
Electronic Clinic helps the students and other professionals to learn electronics, designing, and programming. Electronic Clinic has tutorials on Arduino, Arduino Nano, Raspberry PI, image processing, gsm based projects, Bluetooth based projects, esp8266 projects, Nodemcu projects, robotics, desktop application designing and programming, PLC, SCADA, RC Planes, Electronics, Power Generation, HMI, and much more. Check my Playlists.

#minioscilloscope #oscilloscope #handheldoscilloscope

Комментарии

Информация по комментариям в разработке