Скачать или смотреть Mosaic Cross, Resin Layer 2!

Mosaic Crosses, Resin Layer 1!

My Mosaic Cross Process:

Step 1 Layouts: The pieces for each cross are chosen. (Cut, Sanded, Placed)

Step 2: Pre-seal wood pieces with resin. This helps with bubbles and protects against bleeds. Let cure for 24 hrs and trim off excess.

Step 3, Mold: Place wood pieces in each mold. I have found that the mold release spray also helps hold the pieces in place a bit. The color layer needs to be thin so the wood does not float, but think enough to be opaque and blend as it self levels. Let cure for 24 hours.

Step 4, Mold: Fill with clear deep pour resin. Let cure for 3 days before de-molding.

Step 5: Sand and prep for flood coat after curing for a total of 5 days.

Step 6: Tape backs, flood coat.

Step 7: Scuff up and another gloss coat if needed.

Step 8: Once cured, use heat gun to remove tape with resin drips and sand bottom edges as needed.

This process takes about 12-14 days before it can be sold (finished & fully cured).

Molds: ‪@CraftedElements‬

Pigment: ‪@EyeCandyPigments‬

Resin: ‪@promiseepoxy‬ & ‪@TotalBoat‬

#handmade #smallbusiness #resinandwood #cross #wallcross