Tips and Tricks for Finishing 3M™ Perfect It™ Fast Cut Plus Extreme

Learn some general tips and tricks for finishing with 3M™ Perfect It™ Fast Cut Plus Extreme, including:

1. Surface Preparation: Before using the Fast Cut Plus Extreme compound, ensure that the surface is clean and free from any dirt, dust, or contaminants. This will help to achieve the best results.

2. Proper Application: Apply a small amount of the Fast Cut Plus Extreme compound onto a foam or wool pad. It is recommended to start with a foam pad for lighter cutting and switch to a wool pad for heavier cutting if needed.

3. Speed and Pressure: When using the compound, it is important to find the right balance of speed and pressure. Start with a low speed setting on your polishing machine and gradually increase it as needed. Apply moderate pressure to the surface, allowing the compound to effectively remove imperfections.

4. Work in Sections: Divide the surface into manageable sections and work on one section at a time. This will ensure that you have enough control and focus on each area, preventing the compound from drying out before it can be properly worked into the surface.

5. Overlapping Passes: Make overlapping passes with the polishing machine to ensure even coverage and consistent results. This will help to avoid any uneven or patchy areas.

6. Clean and Inspect: After working on each section, wipe off the excess compound using a clean microfiber cloth. Inspect the surface to check for any remaining imperfections or swirl marks. If needed, repeat the process in specific areas to achieve the desired finish.

7. Follow with Finishing Polish: Once you have completed the Fast Cut Plus Extreme process, it is recommended to follow up with a finer polishing compound or finishing polish to refine the surface and remove any remaining haze or swirl marks.

Remember to always follow the specific instructions provided by 3M for the Fast Cut Plus Extreme compound and use appropriate safety precautions when working with polishing compounds and machinery. Watch this video for a comprehensive demonstration.
https://shop.am-ind.com/search/catalo...
https://shop.am-ind.com/catalogue/pro...