Front and Rear Strut Assemblies (Shocks, Springs) | Porsche Cayenne (955, 957) (2003 - 2010) (9PA)

Here's is a complete guide on replacing the front and rear strut assemblies on the Porsche Cayenne (955, 957) (2003 - 2010) (9PA). Shown here is a 2008 Base Model V6 / VR6 3.6L. The strut assembly includes the shock and spring.

Kit https://amzn.to/4cQERRo

CHAPTERS
00:00 [0] Introduction
00:27 [1] Front Strut Assemblies: Jacking it up
Low Profile Jacks https://amzn.to/41CTq6Q
Jack Stands https://amzn.to/3RuRAAu
Rubber Pads https://amzn.to/3ty185R
Wheel Chocks https://amzn.to/41CemLs
00:33 [2] Loosen, disconnect sway bar link
PB Blaster https://amzn.to/48a30km
WD-40 https://amzn.to/3GWpxFh
18mm Wrench x 2 https://amzn.to/3RC7V6j
02:13 [3] Remove lower strut base nut
21mm Socket https://amzn.to/3v8GmtX
03:11 [4] Disconnect brake pad sensor
04:40 [5] Remove brake pad connector
04:52 [6] Pull the warning harness
05:05 [7] Disconnect ABS harness
05:58 [8] Pull brake hose from retainer
06:14 [9] Support the lower control arm
06:26 [10] Remove upper ball joint nut
Torque Wrench https://amzn.to/48u9ASt
06:40 [11] Separate upper ball joint
Pitman Arm Puller https://amzn.to/3RwLqQt
07:31 [12] (Optional) Loosen upper control arm
08:00 [13] Loosen and remove strut nuts
08:18 [14] Remove lower strut base bolt
08:33 [15] Remove the last strut nut
08:52 [16] Remove the strut assembly
09:33 [17] Transfer the sway bar link
10:08 [18] Insert the new strut assembly
12:02 [19] Insert the lower strut base bolt
14:08 [20] Jack up the lower control arm
14:41 [21] Install the sway bar link bolt
15:13 [22] (Optional) Loosen the upper control arm
15:32 [23] Install the ball joint and ball joint nut
Socket Set (Metric) https://amzn.to/48sz6HN
17:00 [24] Reinstall brake line
Gloves (Cotton) https://amzn.to/3TBWWwk
17:27 [25] Reinstall ABS Harness
18:05 [26] Reinstall brake pad sensor wiring
Zip Ties https://amzn.to/41E8rpk
19:27 [27] Lift the vehicle to ride height
19:44 [28] (Optional) Torque the upper control arm bolts
20:01 [29] Torque the lower strut base bolt
20:26 [30] Torque the sway bar link bolts
21:25 [31] Reinstall wheel
21:59 [32] Left vs. Right (Front)
25:38 [33] Rear Strut Assemblies
27:16 [34] Remove the shock nut
27:33 [35] Pull the shock bolt partially
Locking Pliers https://amzn.to/3ttNv7E
28:24 [36] Slide the sway bar link off
29:05 [37] Remove the shock bolt
30:16 [38] Pull the shock absorber out
Safety Glasses https://amzn.to/47dkgni
Rubber Mallet https://amzn.to/3tm7RzP
30:58 [39] Remove the strut bolts
Socket Extensions https://amzn.to/3RAzf51
Flexible Socket Extensions https://amzn.to/3vjAdel
32:06 [40] Remove rear strut assembly
32:34 [41] Transfer upper support mounts
33:09 [42] Install new rear strut assembly
33:18 [43] Install top strut assembly bolts
33:39 [44] Align the bottom of the shock
39:04 [45] Install the sway bar link
39:51 [46] Jack it up to ride height
40:04 [47] Install the lower shock nut
40:45 [48] Install rear wheel
41:15 [49] Left vs. Right (Rear)
44:16 [50] Results

#rearshock #shockabsorber #cayenne

BUSINESS / INQUIRIES   / ruslanvideofilms  
https://www.ruslanvideofilms.com
[email protected]

CAYENNE | 957    • Porsche Cayenne | 957  
Guides | PDFs https://www.ruslanvideofilms.com/957

BOXSTER | 987    • Porsche Boxster | 987.1  
Guides | PDFs https://www.ruslanvideofilms.com/987

MINI COOPER | F-SERIES    • MINI Cooper | F-Series | F55  
Guides | PDFs https://www.ruslanvideofilms.com/mini...

SEE MY YOUTUBE
   • Tips | Cars      • Tips | Home      • vlogs  
   • Porsche Boxster | 987.1      • Porsche Cayenne | 957  
   • MINI Cooper | F-Series | F55  

MUSIC Karl Casey @ White Bat Audio    / @whitebataudio  


DISCLAIMERS

RuslanVideoFilms assumes no responsibility for damage to property or injury incurred to others or self as a result of any information contained in this video. Use this content and information at your own risk.

RuslanVideoFilms is a participant in the Amazon Services LLC Associates and Rakuten Advertising Programs, affiliate advertising programs designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com and Rakuten Partners.

Purchases made through links found in this video and description help support the channel and help us make more videos. Thank you for your support!

If you enjoy what I create and want to support the costs of keeping it going (like parts, equipment, etc.), any donations through Venmo would be greatly appreciated!

https://venmo.com/u/RuslanVideoFilms