200W பட்டைய கெளப்பும் 11.2 4k DENON DOLBY ATMOS FULL PACKAGE

#DENONX5200W
#POLKHTS10
#JAMOS628
#11.2
#DOLBYATMOSHOMETHEATER

####1.65LACS------ INCLUDES 5 SPEAKERS AND POWER SUB WOOFER

DENONX5200 W SPEC

Power and Processing:

9-channel amplifier
140 watts per channel into 8 ohms (20-20,000 Hz) at 0.05% THD, with 2 channels driven
Dolby® and DTS® surround sound decoding
Dolby Atmos processing for use with in-ceiling or "height" speakers for more enveloping surround sound; compatible with 7-, 9-, or 11-channel setups (11 channels requires an external stereo power amp)
Auro-3D® ready decoder for creating three-dimensional soundfields with Auro-3D soundtrack mixes and a 10.1-channel speaker configuration (requires $199 firmware upgrade for activation; see more information)
analog-to-HDMI video conversion
upscales standard-definition video signals to HD and Ultra HD (up to 4K)
Audyssey "Platinum" speaker calibration and system optimization includes:
MultEQ® XT32 advanced auto setup and room calibration uses high-resolution digital processing filters to deliver balanced, dynamic sound to as many as 8 listening positions (expandable to 32 with a professional installer)
DSX® (Dynamic Surround Expansion) optimizes "front height" or "front width" speakers to create a larger soundstage with more engaging surround effects
Dynamic Volume anticipates loud sounds to keep volume levels even
Dynamic EQ improves dialogue, bass response, and surround channel levels at lower volumes
Sub EQ HT provides individual calibration for dual subwoofers, for even bass response throughout the room
Low Frequency Containment reduces the amount of bass that bleeds into other rooms
The AVR-X5200W lets you add two overhead or up-firing speakers (sometimes called "height" or "top" speakers) to a conventional seven-channel system — this is referred to as a 7.1.2 Dolby Atmos setup. Here's a breakdown of all the Dolby Atmos speaker configurations this receiver supports:

7.1.2 - seven conventional surround speakers, one powered subwoofer, and two overhead or height speakers
5.1.4 - five conventional surround speakers, one powered subwoofer, and four overhead or height speakers
5.1.2 - five conventional surround speakers, one powered subwoofer, and two overhead or height speakers
7.1.4 - seven conventional surround speakers, one powered subwoofer, and four overhead or height speakers (requires an external stereo power amp)

POLK HTS 10 SPEC
Add enhanced bass to your movies and music with the classic brown walnut Polk Audio HTS 10 10" 200W Subwoofer. This front-firing subwoofer features a 10" long-throw polypropylene woofer and delivers up to 200W of peak power. With a frequency response of 25 to 180 Hz, the HTS 10 is equipped to handle a variety of listening material. Integrated low-pass filter and phase control settings allow you to achieve your preferred acoustic settings. For installation flexibility, LFE and line level inputs are onboard.
Designed to Provide Deep Bass for Home Theater and Music
The long-throw 10" driver, Power Port technology, and 200W Class-D amplifier are engineered for enhanced bass impact.
Dynamic Balance Driver
The front-firing polypropylene driver with Dynamic Balance technology is Klippel-optimized to help provide clean, clear bass, enhanced linearity, and lower distortion.
Power Port Technology
The floor-firing Power Port is designed to smoothly transition the air flow into your listening area, reducing turbulence and distortion.
Enhanced Control
The subwoofer has built-in controls for variable volume, low pass filter, and phase. Set the toggle to Auto on/off or DC control (12V trigger). All controls are on the rear panel.
Virtually Universal Compatibility
Connect via the LFE or stereo line RCA inputs.
Lower and Upper -3dB Limits
The HTS 10 features a lower limit of 30 Hz and an upper limit of 120 Hz.
MDF Cabinets

JAMO S628 SPEC
Technology
• 1-inch (25 cm) soft dome tweeter/three 5-inch (127 cm) aluminized
midrange drivers/10-inch (254 cm) side-firing woofer.
• Bass-reflex design with dual flared, rear-firing ports: Increases
speaker efficiency and bass output.
• Waveguide: Provides more uniform dispersion from 2-10
kHz. Dynamics and clarity are enhanced while distortion is
significantly reduced.
• Aluminum centre-plug: Eliminates cone breakup for faster
“attack” and increased vocal clarity. Additional voice-coil
cooling reduces power compression.
• Aluminized midrange drivers: Increases cone rigidity and
vocal clarity.
• Side-firing woofer: Provides a slim, cohesive cabinet design
and bass optimization for varying room acoustics.
• Dual, 5-way binding posts: Allows bi-wiring/bi-amplification with
multiple connection options with wire up to 12 gauge (AWG).