Splitting my EZ30 case halves

In this video I take apart the ez30 short block and inspect the cylinders. It looks like there is minimal taper in the cylinders but cyl 1 has an out of roundess larger than standard spec. This is a budget backyard build so I will probably just try to deglaze the cylinder walls and run standard sized pistons from supertech. To do this correctly I should have a machine shop hone the cylinders and use slightly oversized pistons.

Timestamps
00:37 Cyl 1 and 2 Piston pin caps
02:04 Cyl 2 Piston Pin
05:39 Case Bolts
19:45 Cyl 2 Piston
22:22 Cyl 4 Piston Pin
23:25 Cyl 4 Piston
23:57 Cyl 5 and 6 Piston Pins
26:34 Splitting the case halves
27:56 OEM Connecting Rod vs PPM forged con rod
30:14 Measuring the bores