Setup Router as Switch

In this video, we are going to configure the router as a switch in order to extend the network. I will explain a little bit about the network topology and after that, we will login to the router's web management inrterface to perform the change. Below is the way to do this:

1. Assign an IP address to the secondary router, which is in the same subnet with the main router.
2.Turn off the DHCP on the secondary router. After this is completed, the router will become the Switch
3. Connect 2 routers via LAN port.

Video timeframe:

0:00 - Network topology explaination
3:00 - Three main steps
4:16 - Configuration on the first router
5:45 - Configuration on the second router
8:22 - Physical connection between 2 routers
9:40 - Final words

If there is anything not clear or there is any question, feel free to leave it in the comment section and we can discuss.
If you see the video is helpful, please like, share and subscribe to the channel to support me. Thank you!