How to Replace Coolant Temperature Sensor 2008-2010 Ford F250 Super Duty 5.4L V8

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-97-am

This video shows you how to install a new coolant temperature sensor in your 2008-2010 Ford F250 Super Duty 5.4L V8. The coolant temperature sensor sends important information to your vehicle’s computer to manage the efficiency and safety of your vehicle’s engine. A failed sensor could cause damage or overheating.

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2008 Ford F-250 Super Duty XL 5.4L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• Pocket Screwdriver
• 10mm Socket https://trq.video/ob4k-1AXAA00017
• 8mm Socket https://trq.video/ob4k-1AXAA00017
• Needle nose pliers https://trq.video/oLZ-1AXAA00051
• Needle nose pliers https://trq.video/oLZ-1AXAA00052
• T20 Driver
• 1/2 Inch Ratchet
• Ratchet https://trq.video/ocyr-1AXAA00016
• Brake Parts Cleaner
• Cloth Rags https://trq.video/oY2-1AXSS00035
• Gloves https://trq.video/obMo-1AXSS00048
• Safety Glasses
• Silicone Paste
• Thread Sealing Tape
• Razor Blade / Gasket Scraper
• Sanding Block

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.