2GIG-DW40-345: Go!Control Installation Front Door

Here you will learn how to install the 2gig-dw40-345 wireless bypass door/window sensor onto your front door with moldings.

First, locate the raised guides on the contact and make sure they line up with the guides on the magnet. The contact should be installed on the nonmoving part of the door. The contact should be installed on the moving part of the slider. If it is not possible to install in this manner than it should be ok to install the magnet on the nonmoving part and the contact on the slider itself.

Once you have installed your 2gig-dw40-345 onto your sliding door or window GeoArm recommends activating your Alarm.com interactive monitoring services. You can choose between DIY or Pro Alarm Monitoring Services.

The Bypass Door/Window Contact is designed for use on doors that may need to be temporarily bypassed to serve as an entry and exit path to an armed zone.

There is a discreetly hidden push button integrated to the top of the case that allows a user to activate the bypass feature—to open and close the door once without having to disarm the alarm panel. A special coded message is sent to compatible receivers that can log this local user bypass event. An integrated LED indicates to the user, the state and status of the bypass feature. For higher security, the bypass push button can be disabled and the contact can be used as a micro-sized door window contact without the local bypass feature. A message is sent when the magnet is moved away from the contact and another message is sent when the magnet is replaced near the contact again. It communicates with a 2GIG control panel at the 345Mhz frequency. The contact is equipped with a cover tamper to notify the user if the device has been tampered with. (2GIG panel firmware version 1.14 or higher is required to log the bypass activity.)

Features
Wireless signal range: 275 ft (80 m) with 2GIG Panel
Code outputs: alarm; alarm restore; supervisory; low battery; tamper; tamper restore; local bypass enabled*; local bypass disabled*
Transmitter frequency: 345 MHz (crystal controlled)
Unique ID Codes: over one (1) million different code combinations
Supervisory interval: 70 minutes
*Local bypass code output messages are logged only on receivers with updated software supporting this feature

Model Number: 2GIG-DW40-345


2GIG-DW40-345: https://bit.ly/2FHPRCY

2GIG GC2: https://goo.gl/zwg12v

2GIG GC3: https://goo.gl/nwQFnU

2GIG Alarm Monitoring Services: https://goo.gl/gE7kw6

Subscribe to our Youtube Page: https://goo.gl/4gAAPT

Contact GeoArm: https://www.geoarm.com/contact.html

Free Alarm Monitoring Or Security Product Quote: https://goo.gl/XfvNKw

2GIG Sensor Installation Playlist: https://goo.gl/iTmx6E

2GIG GC2 Programming Videos: https://goo.gl/rna6pP

2GIG GC3 Programming Videos: https://goo.gl/vwjuUk