Peugeot 307cc rear light disassembly / Rastavljanje zadnjeg svetla za Peugeot 307cc

SRB-Ako neko ima neki problem sa zadnjim svetlima na Peugeot 307cc (npr korozija zbog prodora vodež u far, što je kod mene bio slucaj). Zadnja svetla mogu da se rastave.
Potrebno je da se pažljivo odvoji crvena plastika koja prekriva far. Nakon toga treba odvojiti unutrašnjnost fara (nekim ravnim srafcigerom) i pažljivo vuci od strane zmigavca, ka led diodama (to je smer kretanja zabica, kako se ne bi slomile, inače postoje dve zabice). Odvojiti sočivo zmigavca. I na kraju imate pristup led diodama. Do fara dolaze 5 zica.
Deo je za zmigavac, a ostatak za poziciju i stop svetlo.
Kod mene je trebalo očistiti koroziju.
Nakon toga pažljivo sastaviti far i poslednju crvenu zaštitnu plastiku zalepiti silikonom.
Nadam se da je barem nekome bilo od pomoci.

/
ENG- If someone has a problem with the rear lights on the Peugeot 307cc (eg corrosion due to water penetration into the headlight, which was the case with me). The rear lights can be disassembled.
It is necessary to carefully separate the red plastic that covers the headlight. After that, the inside of the headlight should be separated (with a flat screwdriver) and carefully pulled by the turn signal, towards the LEDs (that is the direction of movement of the pins, so that they do not break, otherwise there are two pins). Detach the blinker lens. And finally you have access to LEDs. 5 wires come to the lighthouse.
The part is for the turn signal, and the rest for the position and stop light.
I needed to clean the corrosion.
After that, carefully assemble the headlight and seal the red protective plastic with silicone.
I hope at least it was helpful to someone.