South Bend 10L Refurb & Clean 12 hours work in 17 minutes!

This video shows the process of me cleaning up this lathe and making sure it is in good operational condition. This would be similar to the process you may use to clean a machine up before a repaint or a rebuilt. The goal here wasn't to do a restoration, but to make sure that everything was working properly and everything was properly lubricated. These old South Bend lathes can run forever with a little regular care. Some of these have been neglected and well loved over the years so there may be wear. I'm not looking to fix any of that here. Just working with what I have. Many parts on this machine were seized up and would not move very well. After a good cleaning and oiling, everything functions very well and the machine is once again able to do what it was intended for.

Precision Machine Shed Amazon Storefront:
www.amazon.com/shop/precisionmachineshed

Stuff used in this project
Kroil: https://amzn.to/3u2x2Ff
WD-40: https://amzn.to/3H7d5km
Maroon scotch-brite pad: https://amzn.to/3tXcnma
Lead Mallet: https://amzn.to/3g3r1jD
Large Screwdriver W/drive: https://amzn.to/3rTGQ1N
Strap Wrench: https://amzn.to/3IE1tpj
Crescent Wrench: https://amzn.to/3GZxNTj
#0000 Steel Wool: https://amzn.to/3G3NlnM
1/2" HSS Bit: https://amzn.to/3rWfoQS
Scribe/pick: https://amzn.to/3r5BUI8

Follow me on
Facebook:   / precisionmachineshed  
Patreon:   / precisionmachineshed  
www.apexrifles.com

As an Amazon Associate I earn from qualifying purchases.

One time contribution via PayPal:
https://www.paypal.com/cgi-bin/webscr...

E-mail: [email protected]

Check out my other channel!    / @apexcustomrifles