Tactical Precision Under Pressure: Acing the Method Operative Qualification

Here's a Step by Step tutorial on the easiest way to complete the most difficult drill in the Method Repertoire

👉Want to find all the gear we wear? Access all Method Apparel here https://methodendeavors.com/collectio...

In this full demonstration, explanation & breakdown video, we go over the MOQ or Method Operative Qualification. This is a Pass or Fail qualification. Designed by our staff, it's meant to work multiple mechanics and variables coupled with accuracy on the move. This drill will test your fundamentals and efficiency so lets get into it!

(MOQ) Method Operative Qualification SETUP:
1 Target - C Zone Paper or C-Zone Steel (we prefer steel)
-2 cones 10yd away from the target, spaced 10yd apart from each other left to right.
-2 cones 20yd away from the target , spaced 10yd apart from each other left to right
- This will result in a 10yd x 10yd square of 4 cones and 1 target.

EQUIPMENT SETUP
- Primary with sling
- Secondary with holster
- 15 round mag in Primary
- 20 Round Mag on standby in pouch
- 5 Round Mag somewhere on body for second stage
- Secondary Fully Loaded

COURSE OF FIRE
- Start at the rear left cone in high / low ready beginning with x1 15rd mag
- Timer goes off and engage firing 5 rounds in place
- Begin movement forward toward front left cone while firing 5 more rounds **must be on the move*
- Arrive at front left cone and begin movement toward front right cone while firing 5 more rounds ***must be on the move***
- Achieve bolt lock and transition to secondary and get to front right cone
- Fire 5 rounds from secondary in position
- Perform a check drill reholstering secondary and getting primary RELOADED WITH 20RD MAG back in the fight.
- Sprint toward the rear right cone with muzzle in safe direction.
- Turn and fire 5 rounds while moving laterally toward starting cone position.
Timer ends after last shot fired.
MUST BE COMPLETED IN 30 SECONDS W/ NO MISSES

**You should now have a 15 round mag in your primary and set up the 5 round mag to grab somewhere when performing the check drill**

SECOND STAGE IS SAME ,JUST THE OPPOSITE DIRECTION
- Start at the rear-right cone in high / low ready beginning with x1 15rd mag
- Timer goes off and engage, firing 5 rounds in place
- Begin movement forward, toward front-right cone while firing 5 more rounds **must be on the move*
- Arrive at front-right cone and begin movement toward front-left cone while firing 5 more rounds ***must be on the move***
- Achieve bolt lock and transition to secondary and get to front-left cone
- Fire 5 rounds from secondary in position
- Perform a check-drill reholstering secondary and getting primary RELOADED WITH 5RD MAG back in the fight.
- Sprint toward the rear-left cone with muzzle in safe direction.
- Turn and fire 5 rounds while moving laterally toward starting cone position.
Timer ends after last shot fired.
MUST BE COMPLETED IN 30 SECONDS W/ NO MISSES

QUAL NOTES
- The qualification is complete when both directions have been run and timed
- The Total Time for the qualification is 60 seconds so; if you took 33 seconds on the 1st direction, you'd have to complete the second direction in 27 seconds in order to pass
- No misses are permitted in order to qualify (A miss is anything outside C-zone)
- If using steel, ALWAYS USE CORRECT Ballistic steel & Minimum Safe Distance / angle when firing to avoid fragmentation and accidents
- We recommend a COLD START with this drill as a way to measure you true on-demand performance

LOOKING FOR THE GEAR WE WEAR?
Find it all here👉 https://methodendeavors.com/collectio...

Follow Here On Instagram   / methodendeavors  

For inquiries [email protected]

#specialforces #tactical #training #military #police #options #drills