Скачать или смотреть DM1100 Z - Deburring Machine for Cut Parts - Laser, Shear or Punching

The DM1100 Z is a machine designed for removing light burrs from metal parts cut by laser, punching, or shearing. See the product: https://nsmaquinas.com/product/dm1100...

It has a deburring station that is also capable of finishing flat surfaces such as metal sheets or other metal parts. This machine has a 1100mm width and a 120mm thickness processing capacity, compatible with practically all metal shapes and sizes within those limits. This adds to the machine’s versatility.

► DEBURRING PROCESS
This operation is performed by the DM1100 Z’s deburring station, which uses an abrasive belt combined with a contact roller of 180mm in diameter and with a shore hardness of 55.

► SURFACE FINISHING
The diameter and shore hardness make for the best combination for deburring and surface finishing. Bearing this in mind, the contact roller has a fine-adjustment feature to make the deburring station compatible with abrasive belts of different grits: from a compact grit all the way to scotch-type belts (i.e., from very thick abrasive belts to very thin abrasive belts).

► HIGH-GRIP CONVEYOR BELT
The machine's high-grip conveyor belt, which makes it possible to process parts as small as 50x50mm, or even smaller, depending on their shape and dimensions. The pressure rollers placed before and after the abrasive belt station hold the parts in place during the grinding and finishing operation.

► SIMPLE CONTROL PANEL AND MOTOR INVERTERS
The machine is controlled with the frontal panel, where the operator can turn the abrasive belt unit and the conveyor belt on and off. The DM1100 Z also has an ammeter available to read the motor’s consumption and speed selectors with variable speed (for both the abrasive belt unit, ranging from 8 to 22m/s, and the conveyor belt, ranging from 1.5 to 7m/min). A manual thickness wheel with a 1/10mm-precision display is also included. The two inverters are essential for any deburring and surface finishing operation to be performed on laser-cut parts or metal sheets. The deburring process usually requires the conveyor belt to move at a slower speed and the abrasive belt station to move at a higher speed. The surface finishing process requires a higher speed on the conveyor belt and medium to high speed on the abrasive belt, depending on whether a compact-grit or scotch-type belt is being used. The combination of these two inverters allows for significant efficiency gains as far as the overall process is concerned and regardless of whether the customer needs to do deburring or surface finishing.

► EDGE ROUNDING MACHINE CONNECTION
It can be integrated with the DM1100 C, its edge rounding equivalent. Both can be connected through an extra conveyor belt table to allow for a complete deburring and edge rounding process.

► PARTS RETURN SYSTEM
They can feed the machine the parts, and the return system will bring them back to the operator. Therefore, the parts can be inspected and stored in the same place. There is no need for the operator to move around the machines. This solution is designed to bring back small parts up to 250x250mm and with a thickness of up to 20mm. Plus, it increases productivity when a double-sided process is required.

For more information on this machine, email us at [email protected] or visit nsmaquinas.com and fill in our contact form.