How to Replace Front CV Axle Shaft 2006-2013 Chevrolet Impala

Buy Now!
New CV Axle Shaft from 1AAuto.com http://1aau.to/ib/1AACV00017

This video shows you how to install a cv axle shaft on your 2006-2013 Chevrolet Impala. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2006 Chevrolet Impala
2007 Chevrolet Impala
2008 Chevrolet Impala
2009 Chevrolet Impala
2010 Chevrolet Impala
2011 Chevrolet Impala
2012 Chevrolet Impala
2013 Chevrolet Impala

Tools you will need:
• Pry Bar http://1aau.to/oa/1AXAA00020
• 18mm Wrench
• 13mm Socket http://1aau.to/oa/1AXAA00015
• 18mm Socket http://1aau.to/oa/1AXAA00043
• 19mm Socket http://1aau.to/oa/1AXAA00043
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 34mm Socket http://1aau.to/oa/1AAST00004
• Dead Blow Hammer http://1aau.to/oa/1AXAA00091
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Bungee Cord
• Transmission Fluid
• Drain Pan http://1aau.to/oa/1AXAA00320
• Hammer http://1aau.to/oa/1AXAA00091

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.