How to wire speakers in stereo with 4 channel Timpano Amplifier – TPT-1000.4 and TPT-500.4

Use this quick tutorial to learn how to wire either of these two models:
TPT-1000.4 2 Ohm or TPT-500.4 2 Ohm 4 channel Timpano Amplifiers.

These two models have a common ground design, with only 6 connections instead of 8?
Our choice of this design allowed them to be compact and have a high power output while having a small footprint.

Wire them according to these directions:

The middle terminal will be a shared terminal for the 2 channels of the front and rear channels. At the middle output terminal, the negative wire from the left speaker and the positive wire from the right speaker will be connected together.

Using the outside terminals as the positive and negative terminals for the front and rear channels is the only way you can run those channels in bridge.

It is possible to wire multiple speakers per channel in different configurations because every channel can handle a 2 ohm load.
(4x) 8 Ohm Components in parallel per channel
(2x) 4 Ohm Components in parallel per channel

Or you can just wire at 4 Ohm per channel – 1 Component per channel
The components can be: Speakers, Tweeters, or Drivers.

For any additional questions please contact us directly on our website: https://timpanoaudio.com/contact-us/

Thank you for watching!

#TimpanoAudio #CustomCarAudio #CarAudio #Amplifier #4Channel #Wiring #AudioSystem #SoundSystem #soundcompetition

Quality You Can Trust!